Home / Coffee knowledge / Compak Fino in the Test: do you need the scale?
    Espressomühlen
    Compak Fino im Test: braucht sie die Waage?

    Compak Fino in the Test: do you need the scale?

    After grinding, 0.3 grams of coffee remain in the Compak Fino Scale. This low so-called "retention" is one of the best values in our test field of now over 100 grinders. The Fino is a single-dosing grinder with a 63 mm conical burr set, built by Spanish manufacturer Compak.

    Compak has previously made a name for itself mainly with affordable commercial grinders. The step toward a single-dosing grinder for home use is thus also a step in a new direction, and our test concludes: definitely a good move. The Compak Fino delivers.

    We first saw this model around three years ago at the HOST in Milan, but it's only now on the market. The grinder comes in two versions: with scale for approximately 790 euros and without scale for approximately 599 euros (as of September 2026).

    And that brings us to the question that accompanies this test: Why does a single-dosing grinder need a scale built in after the grinding process?

    A penguin that has jumped against the ceiling too many times

    The Fino looks like nothing else in our test field. We bought the blue version, and Michel and I couldn't agree on the shape in the video: somewhere between a penguin in a tuxedo and a kitchen appliance for squeezing fruit. A matter of taste. As for the build quality, there's nothing to discuss. The housing feels high-quality, nothing wobbles, and there are no visible manufacturing edges. At 7 kilograms of weight, the grinder sits solidly on the countertop anyway.

    Lever with Compak lettering at the bean hopper of the blue Compak Fino Scale

    The data sheet lists 308 millimeters in height when closed and 405 millimeters when the lid is open. The Scale version builds slightly higher at 34.5 centimeters. At 16 centimeters wide and 23 to 24 centimeters deep including the cable, it fits under most kitchen cabinets, but only when closed.

    Included in the delivery are a brush, a screwdriver, a cloth, and a bellows. The bellows fit snugly in the outlet and don't fall out, which is often different with other grinders. With a few pumps of the bellows after grinding, the grinder empties reliably. The dosing cup resembles the cup of the Niche Zero with its round bottom shape. It works well and can be neatly placed over the portafilter.

    At 250 grams, however, it's very heavy. Other cups in our test field weigh less than 80 grams and do their job just as well. Some static charge is noticeable in the cup. Just tap it once underneath, loosen the coffee, flip it over, and you're done.

    Attentive observers will also notice certain similarities in the design and construction with the Niche Zero.

    Buy Compak Fino

    The following specialty shops* carry the Compak Fino and we can recommend purchasing from these businesses.

    Germany: Bohnendealer

    Austria: Bohnendealer

    * We search for specialty partners for you, knowing that they provide good work and good service. We are in close contact with these retailers. These are affiliate links. If you order through this link, it won't cost you more, but we receive a small commission that we invest in new test equipment.

    63 mm conical burr with 270 revolutions and a display that brings joy

    Compak Fino Scale from above with calibration ring, grind size scale, and bean hopper

    Inside, a conical burr with 63 millimeters cone diameter operates, driven by a 280-watt geared motor with 270 revolutions per minute. There is no RPM regulation; the speed is fixed.

    The grind adjustment is the best feature of this grinder. You turn the outer ring, the scale is stepless and divided so finely with thin lines that one line represents approximately one to two seconds of extraction time. This allows you to dial in an espresso really precisely. We recently tested a grinder for four times this price that handles this significantly worse. Thanks for that, Compak.

    Close-up of the stepless grind scale of the Compak Fino at setting 30

    However, there is one limitation that can especially cause frustration at first: out of the box, the finest grind setting was too coarse for espresso. We reset the zero point via the calibration ring. This is provided for in this design and is quick to do, but it shouldn't be necessary and especially unsettles inexperienced home baristas.

    15.4 grams in 10 seconds and 78 decibels

    For 18 grams, the Fino needs 14.3 seconds, which corresponds to 15.4 grams in 10 seconds. This makes it one of the slower single-dosing grinders in the test field. This is due to the low speed and is the trade-off for what lands in the cup. For home use, the grinder speed is usually negligible.

    The Fino is quiet in return. 77.9 decibels at 20 centimeters distance, measured in continuous operation. Under 80 decibels is a good value for a grinder, and the tone remains pleasantly deep without sharp noise artifacts.

    Grinding temperature and consistency: no thermal issues

    The beans are at 21.4 °C before the test. Over five consecutive grinds with 20 seconds pause each, the ground coffee ranges between 26.3 and 30.7 °C, averaging 28.4 °C. More important than the average is that the temperature barely rises over the series. The grinder doesn't heat up, so no breaks need to be planned even with light roasts and regular grinding.

    For dosing consistency, we measure a standard deviation of 0.11 grams over the grinding series. That's very good. What's interesting is a detail: with RDT, meaning a spray of water before grinding, the deviation slightly increases to 0.148 grams, while extracting the grinding chamber reduces it to 0.055 grams. So the Fino doesn't need the water spray for dosing precision. It still helps against slight static in the cup though.

    0.3 grams retention: one of the best values we've measured

    The retention is 0.3 grams absolute. Of that, 0.2 grams are temporary, exchanging with each grind, and 0.1 grams remain permanently in the grinding chamber. We only gathered the 0.1 grams after thoroughly scraping out every particle.

    That's top class in this category, and it's partly due to the design. Conical burrs simply have fewer niches where ground coffee can get stuck; the coffee falls through. In practice, this means: if you input 18 grams, the coffee that lands below is your coffee. And if you grind a decaffeinated after espresso, you're dragging along 0.3 grams from the previous one. No one tastes that. That's exactly what single dosing is for.

    Because so little remains, the grinder doesn't need to be opened and cleaned weekly. Once a month with regular use is enough, twice a month with very dark roasts because these coffees oil faster and the remaining oil in the chamber begins to oxidize. Opening is relatively easy: the chute can be removed via a magnet, you turn off the outer adjustment ring, then a hex screw gives access to the cone. You can't do it without tools, but with the included screwdriver it takes just a few minutes. A grinder cleaner in between doesn't hurt like with any other grinder.

    Single-dosing performance and the question about the scale

    Compak Fino Scale from the front with dosing cup on the integrated scale

    We input 18 grams, a maximum of 0.2 grams less comes out the bottom. That's a good value, and the grinder empties itself in the process, the air blower is optional and not essential.

    And now for the scale. It sits under the chute, it's not connected to anything, it doesn't control anything. It shows how much arrived below. With a grinder that retains 0.3 grams, that's exactly the information we don't need, because in single dosing the coffee is weighed beforehand.

    The scale could be useful for weighing whole beans, then you save yourself an external scale on the work surface. We tried it and think: that doesn't justify the 200 euro premium. Michel would never pay that, neither would I.

    Our buying tip

    Buy the version without the scale and put the money towards better coffee, accessories, or a better espresso machine, and use a small and reliable accurate scale for less money.

    Grind setting replicability: 4 to 5 seconds deviation

    As nice as the scale is, it doesn't deliver what it optically promises. We set grind setting 30 for an espresso: 18 grams in, 45 grams out in 25 seconds. Then we switch to ristretto, then to lungo, and then optically back to the same marking. The shot subsequently ran through in 20 and 21 seconds, so 4 to 5 seconds faster than before. The x50 value confirms this: 210.8 micrometers at the initial espresso, 238.5 micrometers after the return.

    The reason lies in the thread. The adjustment ring is essentially a screw, and it needs play to operate. With espresso, we're working in a burr gap range of approximately 80 to 100 micrometers, which is the thickness of a sheet of paper. A difference of two or three micrometers changes the extraction time by several seconds. For practical use, this means: when we switch between recipes, we always approach the noted setting from the same direction, for example using a roughly chosen reference point at 50. And be prepared that after a recipe change, a brief adjustment may be necessary.

    Particle distribution: 40 percent fine peak and a narrow main peak for a conical grinder

    We analyze the particle distribution together with ZHAW using the Retsch Camsizer X2. In the espresso setting (T4), we measure an x50 of 210.8 micrometers, a fine peak of 40.4 percent, which is the proportion of ground coffee under 100 micrometers, and a main peak of 252.6 micrometers.

    A fine peak of 40 percent is high. In practical terms, this means more extraction resistance, more body, and the need to grind somewhat coarser than with a grinder that produces fewer fines. At the same time, the main peak at 252.6 micrometers is narrow for a conical grinder. Conical burrs often produce considerably broader distributions, and anything under approximately 300 micrometers extracts evenly enough in espresso to taste balanced.

    This combination has a clear direction: it suits medium and darker roasts, where body and sweetness are in the foreground. If you want light specialty coffees with maximum clarity in the cup, you'll find grinders that do that better. The Fino can certainly grind light roasts, they'll just be somewhat more body-forward and less clear.

    The three additional samples show that the grinder covers the entire range cleanly: in the ristretto (T5), the x50 drops to 187.8 micrometers at 41.6 percent fine peak, in the lungo (T6) it rises to 297.2 micrometers, and the fine peak drops there to 33.7 percent.

    In the cup: solid sweetness, integrated acidity, medium body

    We tasted Toca from Mexico. The espresso shows medium body, a clearly perceptible but well-integrated acidity, and a round sweetness. Our test classic Apas also performed well as an espresso.

    ★ Michel Indelicato, Q-Grader Arabica

    "That reminds me very much of what I know from the Niche Zero, with a tick more clarity."

    That hits it well. The Fino doesn't extract the finest, most exquisite qualities from a complex coffee, but it reliably delivers a solid, body-forward espresso and is pleasantly forgiving in its adjustment. For a journey through different coffees, that's exactly the right characteristic.

    Conclusion: a good grinder you should buy without a scale

    The Compak Fino is a well-built single-dosing grinder that excels in the categories that really matter in everyday use. Two or three years ago, at 599 euros, we would have said that it's difficult to find something good in this price range. That has changed, and the Fino is a good example of it.

    Strengths

    • 0.3 grams absolute retention, one of the best values in our test field
    • 77.9 decibels, making it one of the quieter grinders
    • Very fine, stepless grind scale with one to two seconds extraction time per line
    • Dosing consistency of 0.11 grams, no heating over the grinding series
    • Build quality and haptics that look like durability

    Weaknesses

    • Slow: 14.3 seconds for 18 grams
    • Grind setting replicability with 4 to 5 seconds deviation after recipe changes
    • Out of the box, the finest grind setting was too coarse for espresso, the zero point had to be reset
    • The scale costs 200 euros extra and provides information that nobody needs with single dosing

    For whom? For anyone who makes an espresso in the morning and one in the afternoon at home, likes to switch between coffees, and values fresh ground coffee without old residue. Medium and darker roasts are its home, and it forgives adjustment mistakes.

    For whom not? For anyone who grinds many espressos in a row, because it's too slow for that. And for anyone who uncompromisingly wants the clarity of light specialty roasts in the cup.

    Price-performance: At approximately 599 euros without a scale, you get a grinder with very low retention, one of the best grind scales in this class, and manufacturing from Europe. There are grinders that are cheaper for entry-level use. For what's built in here, the price is reasonable. At approximately 790 euros with a scale, it isn't.

    The Fino is a grinder with which you can start a world tour through coffee and still enjoy it in a few years.

    Test results: Compak Fino Scale

    Performance & measurements
    Volume 77.9 dB
    Speed / 10 sec 15.4 g
    Speed / 18 g 14.3 sec
    Temperature 28.4 °C

    Retention
    Temporary retention 0.2 g
    Permanent retention 0.1 g
    Absolute retention 0.3 g
    Single dosing performance 0.2 g
    Practical evaluation
    Consistency (std dev) 0.11
    Usability good
    Grind setting replicability medium
    Cleaning operation good
    Espresso potential good

    Evaluation according to the KM test protocol for espresso grinders. All measurements taken by us. The particle distribution has no separate line because it manifests itself in espresso potential.

    Technical specifications at a glance

    Property Value
    Price approx. 599 EUR (without scale) / approx. 790 EUR (Scale), as of September 2026
    Grinding mechanism Conical burr mill, 63 mm
    Motor 280 W geared motor, 270 rpm
    Operating mode Single Dosing
    Container capacity 40 g (hopper), 65 g dosing cup
    Grind adjustment Stepless, calibration ring, fine scale lines
    Grinding speed 15.4 g / 10 sec. (14.3 sec. for 18 g)
    Noise level 77.9 dB(A)
    Grinding temperature 26.3–30.7 °C over 5 grinds (average 28.4 °C)
    Retention absolute 0.3 g (of which 0.2 g temporary, 0.1 g permanent)
    Single-dosing deviation 0.2 g
    Consistency (std. dev.) 0.11 g
    x50 (Espresso, T4) 210.8 µm
    Fine peak (Qf <100 µm) 40.4 %
    Main peak (60%-peak width) 252.6 µm
    RPM control No
    Dimensions (H × W × D) 308 × 165 × 240 mm closed, 405 × 165 × 240 mm open (Scale version 345 mm high)
    Weight 7 kg
    Special features Anti-popcorning lid, magnetically removable discharge, anti-static system, hand bellows included

    As always, we purchased this grinder ourselves. This test was not requested by Compak.

    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy