Home / Coffee knowledge / DF83 V Single Dosing Grinder Tested
    Espressomühlen
    DF83 V Single Dosing Mühle im Test

    DF83 V Single Dosing Grinder Tested

    The DF83 V is a single-dosing grinder with 83 mm grinding discs that is set to give some commercial grinders a run for their money in terms of speed and performance. But even when purchasing, there is a first hurdle: getting the right model. The DF83 V2 sound very similar by name, but are different grinders. With the DF83 V, the "V" stands for variable speed, while the DF83 V2 is merely a version number of the DF83 without variable speed.

    Confusing so far! This review covers the DF83 V with variable speed. The test of the DF83 V2 can be found here.

    We compared 10 single dosing grinders in the price range of 500 to 1000 euros. Learn more about it in our article on the topic.

    Lots of Power!

    The DF83 V impresses with power and speed. Made in China, the grinder is equipped with 83 mm flat grinding discs and is powered by a 680-watt brushless DC motor. The speed can be variably adjusted between 300 and 1600 rpm.

    In our test, this translates into very high grinding speeds. The 18 grams of coffee entered are ground through in single-dosing mode in 6.5 seconds. With a filled hopper, the grinder achieves an impressive 66 grams of coffee in just 10 seconds at espresso grind setting – that's really fast.

    However, this speed comes with high noise levels. During the short grinding process, we measure 91.6 decibels. The temperature of the ground coffee also rises slightly: after five shots we measure an average of 34.5 °C. This is still unproblematic for taste, but noticeable nonetheless.

    Dimensions and Weight:

    • Size: 32 x 13.5 x 39.5 cm (L x W x H)
    • Height without hopper: 28 cm, with hopper and accordion seal: 39.5 cm
    • Weight: 9 kg

    Get the DF83V from a specialist partner business: Bean Dealer* ships internationally.

    *We search for specialist partners that we know do great work and provide good service. We are in close contact with the dealers. These are commission links. If you order through this link, it won't cost you more, but we receive a small commission that we put into new test equipment.

    Everything about single dosing and comparable grinders.

    df83v vs df83 comparison

    Construction and Design

    The grinding discs of the DF83 V are oriented horizontally to reduce retention. Whether this really works, we clarify in the next section. First, however, the beans fall onto a massive screw that pre-breaks them and passes them on to the grinding discs.

    Some users report that the screw doesn't keep up at low speeds, causing clogging. In our test, we could not detect this problem in the grinding range of 700 to 1600 rpm – a range typically used for filter coffee through espresso.

    A plasma generator helps reduce static charge. Nevertheless, it is also advisable with the DF83 V to lightly spray the beans with water before grinding, as is the case with many single-dosing grinders.

    The grind setting is infinitely adjustable and precise. We were able to easily switch between recipes and thanks to the grind indicator, we could return to the original grind setting. Our particle distribution measurement also showed very good reproducibility of the settings.

    The grinder is easy to open and clean. The grinding discs can also be easily swapped for aftermarket grinding discs such as SSP. It is noticeable that the front grinding unit has slight play in the chamber. This could lead to alignment problems, which we did not observe in our test. Better bearing would still be desirable.

    The housing is made of aluminum and powder-coated. Overall, the grinder makes a high-quality impression.

    grind range df83v

    Usability of the DF83 V

    The DF83 V is operated from the front, but the grind setting can only be seen from above. This could have been solved better for people in wheelchairs.

    Two buttons and the speed setting are located on the left side of the grinder. The main switch is not very appealing in design: it sits on the grinder with a protruding rubber bellows border. When the grinder is switched off, the speed display does not light up.

    A supplied cup that fits into a 58 mm portafilter sits directly under the discharge chute. This prevents ground coffee from dispersing in the room. However, the cup only has a weak magnet and therefore slides less elegantly into place. Additionally, it can only be guided from the front under the discharge, as the inlet opens to the front. Sliding in from the side quickly causes the discharge chute to drop off.

    The included dosing container is not convincing. It lacks side wings, which means it can slide too deep into the portafilter. This could promote channeling – an update would be urgently recommended here.

    Retention

    The potential retention and empty space around the grinding discs of the DF83 V should not be underestimated.

    • Temporary retention: 0.4 g
    • Permanent retention: 0.4 g
    • Total retention: 0.8 g

    Compared to grinders with a hopper, that's little, but for a single-dosing grinder, 0.4 g after RDT is still a lot.

    If you use the grinder multiple times a day, you won't notice it. At home, however, it can be bothersome if the next coffee isn't brewed until the next day.

    It's positive that the temporary retention exchanges consistently – 18 g in, 18 g out.

    particle distribution df83v

    Espresso and Filter Coffee Quality

    The DF83 V produces delicious espresso: straightforward, solid, on point. The coffee has an emphasized body, while complexity and clarity are less pronounced with the standard grinding discs. If you want more clarity, you should opt for SSP grinding discs. For filter coffee and bright specialty coffees, SSP grinding discs would also be the better choice.

    Conclusion on the DF83V

    The DF83 V is a strong single-dosing grinder that supplied us with delicious espresso over months. It scores with power and speed, but is more suitable for environments with higher throughput.

    For home use, a little more focus on precision would be desirable. But thanks to aftermarket grinding discs, the grinder offers great potential for customization.

    rating df83v

    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy