Single-dose espresso grinders fascinate us. So our test of the Niche Zero was correspondingly positive. But the Niche — not just since Brexit — burns a hole of around 800 euros in your wallet. We wished for similar performance for less money. And so much for the preview. The G-Iota, which is also offered as DF64 in many places, fills exactly this gap. The DF64 costs half as much as the Niche Zero, but doesn't need to hide in terms of performance.
To the current test report of the DF64 Generation 2.
In our test report, we examine the grinder in all its facets, provide a few tips, and even venture a first comparison with the 23 other espresso grinders we're currently testing. Here's the comparison with grinders in the same price range.
In the meantime, we've published an upgrade video for the G-Iota. We've tried various things. Among other things, we've installed SSP Multipurpose burrs, which do excellent work. With that, the DF64 is even better.
For Austria and Germany, Bohnendealer* is the importer of the G-Iota. Unfortunately, there's no official importer in Switzerland.
Buy DF64
The following specialty retailers* carry the current DF64 Gen 2 and we recommend purchasing from these businesses.
Germany: Coffee24
Single-dose or Single Dosing – what is that?
Espresso grinders are experiencing their 2nd evolution today, which has now also arrived on the home market. The 1st evolution was the step from "bean hopper" or "dispenser" to on-demand grinding or "grind on demand". Instead of grinding larger quantities of coffee in advance and storing them in the dispenser, you grind directly into the portafilter. A first step towards greater freshness and less oxidized coffee was the result.
Today we're going through the 2nd evolution, with the step toward single-dose grinders. Because even now, a larger portion of the coffee still stands exposed to oxygen and light in the bean hopper. The single-dose or single dosing principle is permeating the market, and it works like this: a home barista weighs out the desired amount of coffee, puts it in the feed chute at the top, and grinds directly into the portafilter.
This makes it possible to switch coffees. For guest A, you can simply brew a decaf, while guest B prefers a fruity espresso. The coffee stays fresher because it's stored in the perfect container. For the home barista, by weighing the coffee, the connection between the brew ratio becomes clear and the possibility of experimenting with recipes opens up.
What a single-dose grinder must be able to do:
The grinder should have no retention and should expel all the ground coffee.
The brew recipe must be well adjustable, and the grind size should, even after adjustment, return to the same marking area with the same particle distribution.
In short, consistency and precision are important!

The bellows of the DF64 ensure that the grinder has no retention.
DF64 as a Single Dosing Grinder
The DF64 meets the criteria required for a good single-dose grinder very well. It uses some auxiliary tools, like the bellows, but in the end result, the grinder achieves its goal.
If the DF64 is used without the bellows, it has a retention of 1.5 grams of coffee. While this is a good result compared to many conventional grinders, it's not acceptable for a single-dose grinder. By using the bellows, the retention can be reduced to nearly 0 grams. We recommend that after grinding the main amount of coffee, use several bellows puffs to remove the remaining ground coffee from the area behind the flapper. Caution: this can result in a forceful push that also causes some scatter of ground coffee on the table. With careful puffs, we were usually able to avoid this. This reduces the residue in the grinder (retention or grind retention) and, for example, the 18 grams of coffee entered are consistently ground out.
The grinder also impressed with precision. We were able to easily adjust the grind size and return to the same grind size. Indeed, the grinder lacks a good grind size marking. Creative minds have developed marking pointers for 3D printers that work well and can be ordered, for example, on portals like Etsy*.
A corresponding update could improve the grinder further or make operation easier. However, we had no trouble returning the grinder to the same grind size. In fact, the grinder was more precise in adjusting and returning to settings than many other grinders in our test series.
So we can confirm everything about the DF64 or G-Iota that makes a good single dosing espresso grinder!

Espresso Performance of the DF64
We enjoyed the espressos from the DF64. They were well-balanced and various emphasis points worked out nicely. The particle distribution of the grinder was solid average.
Espresso data (T4):
- X50: 318.30 Micron
- Fine peak: 20.78 %
- Main peak: 247.58 Micron

Operating the DF64/G-Iota
We already covered operating the DF64 in the chapter on single-dose capability. Basically, the grinder can be adjusted precisely and well. The large grind adjustment wheel runs very smoothly and allows stepless adjustment. The large diameter has a sluggish transmission relative to the actual grind size adjustment. This is very positive, in contrast to grinders like the Eureka Specialità, where the small adjustment wheel often overshoots the mark.
The grinder has no other adjustment options. There's an on and off button. That's it.
Grinder alignment doesn't belong to the classic "adjustment" and operating scope. Some users report that their DF64 was delivered with burrs that don't line up perfectly with each other. As a result, the ground coffee has a less precise particle distribution, and the burrs also become dull faster. The position of the burrs can be checked and adjusted independently. We'll make a video about this. But there are already several instructions on the web under the keyword grinder alignment. With our DF64 model, the burrs were perfectly aligned.
When using the bellows, we advise careful and controlled pressing so that the grind size doesn't change.

Side view of the G-Iota with transparent dosing cup that fits directly on the portafilter.
Size, Weight, and Appearance
Elegant, narrow, and heavy — that's how the G-Iota stands next to our Decent Espresso. It's available in various color patterns. We purchased and tested a black and white model (like all grinders, we also bought these grinders ourselves for testing purposes). The grinder is among the heavier models in the price segment up to 500 euros. The grinder weighs 13 kilograms on the scale and stands very firmly and solidly. 30 mm height, 130 mm width, and a depth of 225 mm create a coherent picture.
The grinder comes with a transparent dosing cup. The dosing cup fits well into the portafilter holder. Our cup got a small crack when tapping it out. Benjamin and Michel disagreed on evaluating the cup. While Michel would swap the cup for a metal one, Benjamin appreciated the transparent design. Especially for learning and training purposes, the transparency is interesting, as you can clearly see how the ground coffee distributes in the portafilter.
Not only does the dosing cup fit into the holder, but all standard portafilters from companies like Rocket, La Marzocco, or Slayer also fit. With portafilters that have larger side ridges, there's wear on the rubber retainers. However, these can be easily replaced.

Conclusion on the DF64 - G-Iota
The G-Iota is a really good grinder that impresses in almost all categories in our test. Only in terms of speed does the grinder belong to the slower models with only 19.1 grams output in 10 seconds.
The grinder's noise level at 83.2 decibels is in the middle range. Operation is smooth and very precise. The bellows reduce retention to 0. This makes the grinder not only very good for single dosing.
In terms of value for money, the G-Iota convinces with a purchase price of around 400 euros. As you can also see from our video: we're very impressed with the DF64. A really good espresso grinder and a very interesting choice as a single-dose grinder.
And that's not all: if you want to improve the grinder further, you can achieve even better grinding results by switching to 64 mm SSP burrs. Whether that's necessary and whether we can recognize the difference in a blind tasting, we'll deliver that as a result and video. We also plan a direct comparison with the Niche Zero and Eureka Single Dose.
Upgrade Video for the DF64 G-Iota
► SSP Red Speed Burrs at Bohnendealer*
► G-Iota grind size indicator on Etsy*
► Beveled improved dosing cup holder for DF64, G-IOTA on Etsy*
► G-Iota Dosing Cup Holder 51 mm on Etsy*
*This is an affiliate link. If you order through this link, it won't cost you any more. However, we receive a small commission. This helps us buy more test equipment and publish new tests. Thanks in advance! We also refer you to a shop that we know well and from which we know offers good service.
![]()
















