Grind size is the variable that influences your espresso more than anything else — more than brew temperature, more than tamping pressure, more than the machine. Yet "how fine should I grind?" is a question that has no universal answer. We explain why that is, how to find your grind size, and what you can do if it doesn't taste right. (You'll find the basics of espresso preparation in our preparation guide.)
Why there's no number
"Set your grinder to 12" is a sentence you read constantly in forums. The problem: setting 12 on your grinder produces a completely different particle size than setting 12 on a grinder of the same type. Even two identical grinders from the same factory can grind differently at the same setting. The burrs sit slightly differently, the calibration varies, and use has worn the burrs unevenly.
Grind size is therefore not a numerical value you can transfer. It's a setting you need to find yourself for your grinder, your coffee, and your machine. The good news: it's less complicated than it sounds.
The method: Finding the right grind size through timing
You need three things: a scale, a stopwatch (or a scale with a timer), and a recipe as a starting point. Let's use the standard recipe: 18 g coffee, 36 g espresso in the cup, time window 25–30 seconds.
Dose 18 g of coffee, tamp, pull the shot, and observe two things: how many grams land in the cup and how long it takes. The extraction time tells you whether the grind size is correct.
If the espresso runs through too quickly (e.g., 36 g in 18 seconds), the grind is too coarse. The water finds too little resistance and rushes through the puck. The espresso typically tastes sour, thin, and watery.
If it runs too slowly (e.g., 36 g only after 40 seconds), the grind is too fine. The water barely gets through, the coffee is over-extracted. The espresso tastes bitter, astringent.
If you land in the time window (25–30 seconds for 36 g), you're in the right range. From here on, your taste decides.

Adjusting grind size: How much to turn?
Here's the rule: less than you think. With most espresso grinders, small adjustments make a noticeable difference. With some grinders with fine gradations (e.g., the Eureka Mignon or Niche Zero), it's even just one or two click stops or lines. How finely you can adjust the grind size is itself a purchase criterion when deciding which grinder you need.
The rule of thumb: adjust the grind size in small steps and pull a shot after each change. Don't jump from "way too coarse" directly to "extremely fine" — you'll almost always overshoot, and especially when you make it noticeably finer, the grinder can even clog. A good rhythm: one small adjustment, one shot, taste, correct. After three to four shots, you're usually in the right range.
Important: after adjusting, discard the first small amount of ground coffee (2–6 g is usually enough). There's still powder from the previous grind size in the burr chamber. If that gets into your portafilter, it will skew your result. We call this leftover coffee retention, and it varies from grinder to grinder.
When you need to readjust the grind size
Grind size is not a set-and-forget setting. Several factors change how the coffee behaves at the same grind size:
New coffee: Each coffee has a different density, cell structure, and roast. When you open a new bag — even of the same coffee — the grind size can be slightly off. With a completely different coffee (e.g., from light to dark roast), you often need to adjust several settings.
Coffee age: Freshly roasted coffee releases CO₂. In the first days after roasting, it resists water more strongly, so the shot runs slower. At the same time, it's fizzy and not yet tasty. We recommend waiting about two weeks after roasting before preparing an espresso from a coffee. The longer the coffee is open, the finer you need to grind over time.
Humidity: At high humidity, ground coffee swells slightly and creates more resistance. On humid summer days, the espresso can suddenly run slower even though you haven't changed anything. Going one setting coarser usually solves it.
When espresso tastes sour — despite a fine grind
A common problem: espresso tastes sour, so you grind finer. And finer. And eventually the shot runs for 40 seconds and still tastes sour. What's going on?
Usually channeling. When the grind is very fine but the coffee puck isn't distributed evenly, pressure builds unevenly. Water finds a channel through the puck and extracts everything there (bitter), while the rest of the puck barely gets any water (sour). The result is an espresso that tastes simultaneously sour and bitter, no matter how fine you grind.
The solution isn't in the grind size, but in puck preparation. Distribute coffee in the portafilter evenly (WDT with a needle works well), then tamp evenly. More on this in our preparation guide. Pre-wetting can also help with channeling because it saturates the puck more evenly before full pressure comes.
If none of that helps and the espresso still tastes sour with the right time and ratio, brew temperature can play a role. Temperature that's too low extracts fewer acid-binding compounds. Two to three degrees more can make the difference. But try grind size and puck preparation first — that solves 90% of the problems.

Espresso grind size vs. filter coffee grind size
Espresso requires the finest grind of all brewing methods. For comparison: filter coffee is ground about like fine sand, French press like coarse sea salt. Espresso is somewhere between powdered sugar and fine sand — noticeably finer than anything else.
There's a simple reason: contact time for espresso is only 25–30 seconds. For water to extract enough flavor from the coffee in this short time, the surface area of the coffee particles must be as large as possible. Finer grind = more surface area = more extraction per second.
That's why you need a grinder for espresso that can grind fine enough while producing a uniform particle size. Not every coffee grinder can do that. A decent espresso grinder costs around 200 euros or more. Cheaper grinders can grind fine, but unevenly — with many coarse particles and many too-fine particles at the same time. This leads to under- and over-extraction in the same shot. Our big espresso grinder test shows which grinders can do it. A curated selection of recommended grinders can be found in the espresso grinder selection. Manual grinders are often the best choice in the affordable range under 100 euros.
Setting grind size: Reaching your goal in five shots
If you have a new grinder or want to open a new coffee, this method gets you to the goal quickly. Define the recipe or use our recipe. We provide a recipe for every espresso in our shop.
Shot 1: Start with a setting that seems roughly right to you. Dose 18 g, pull to 36 g, and stop the time. If the shot takes less than 20 seconds: grind noticeably finer. Over 35 seconds: grind noticeably coarser.
Shots 2–3: Correct in the right direction, in small steps each time. You should now land in the 22–32 second range.
Shots 4–5: Fine-tuning. Small corrections, taste, evaluate. If the espresso is in the time window and tastes good to you: done. If it's in the time window but doesn't taste right: read on under sour espresso or adjust the brew ratio (slightly more or less water).
Yes, that costs you five shots of coffee. Think of it as an investment — after that, you know where your grinder stands and only need to make minor adjustments.
More on brew time and why it's your most important diagnostic tool: Espresso extraction time: When does brew time really matter?
Your espresso tastes sour? Then check out our detailed troubleshooting article: Sour espresso — what to do?
















