We tested the La Basilea Uno in 2019. A dual boiler machine with ideas from Viktor Schuler from Basel, built near Venice. Viktor is a long-time friend and advisor when it comes to machine concepts. His philosophy is built into this machine. Back then it cost 2,200 euros, today the price is 2,450 euros (without wood application) or 2,750 euros (with wood). Is the upcharge worth it compared to inexpensive entry-level machines? We tested it thoroughly.
Design & Build: Deep, not tall
The machine has different proportions than most portafilter machines. Exact dimensions: 295 × 510 × 430 mm (width × depth × height). 51 centimeters deep – for comparison: a Rocket Appartamento or Quick Mill Rubino is 43 centimeters. That's almost 10 centimeters more. But only 43 centimeters tall. The footprint is about the size of an A4 sheet of paper.
At 28 kilograms, the machine puts considerable weight on the scale. It sits solidly on the counter, no wobbling. The housing is made entirely of stainless steel, as is the frame – corrosion protection included. The build quality is solid, uniform gaps, no sharp edges. Two pressure gauges are installed – one for brew pressure, one for boiler pressure. Plus LED lights and on the right the PID controller with integrated shot counter. During extraction, the time runs along, which has become standard for machines with PID control in this price range.
The wood version costs 300 euros more, bringing you to 2,750 euros. Small detail: a protective cover protects the cup warmer on top.
Technology: 3-liter boiler installed horizontally
The heart is an insulated 3-liter boiler. Unusual: it's positioned horizontally in the housing, not vertically as usual. Probably the height didn't work. With the depth they had plenty of space. The heat exchanger holds 0.3 liters.
This is a dual boiler with PID control. What does that mean? You set the boiler temperature and thereby indirectly influence the brew temperature. You can fine-tune that via the PID.
Special feature: a rotary pump is installed. It runs quietly, consistently, and allows connection to mains water. This is definitely an advantage over vibration pumps. The machine runs on 1,500 watts at 230 volts.
Practical feature: a stop function when the tank is empty. The machine shuts off before the pump runs dry.
The steam wand and hot water wand are stainless steel with cold-touch insulation – you won't burn your fingers if you accidentally touch them. The feet are also stainless steel.
When you open the machine – the lid comes off easily – you immediately see the large boiler with the second circuit. The hot water sensor goes in nicely visible. Behind it the 2-liter water tank, below the pump. Very tidy, like most machines of this type. What really impresses: the sheer size of the boiler relative to the total volume. 3 liters is significantly more than the usual 1.6 or 1.8 liters on comparable machines.
The water tank is easy to remove – just lift it up, pull it out, done. Very well thought out.
Temperature Management: A flat line
This is where it gets interesting. We tested the machine with the temperature portafilter. The result? Incredibly temperature stable. At 93.1 to 93.2 degrees throughout the entire extraction – like a flat line. No fluctuations, no drop, no rise. With most E61 machines we see 0.8 to 1 degree temperature drift during extraction, often declining. Here: smooth as a ruler.
The 3-liter boiler pays off. More mass means more thermal stability. The second circuit constantly returns to the right temperature, even during extraction. That's impressive.
When we first started it up we had it set to 123 to 124 degrees boiler temperature – that came out at nearly 98 degrees. Way too hot. We then turned it down to 113 to 114 degrees and got perfect 93-degree brew temperature. The PID can be adjusted precisely, an offset is quickly calibrated.
Espresso Quality: Balanced and stable
At 93 degrees brew temperature we pull well-balanced espressos. The balance is right: sweet, slightly fruity, without annoying bitterness. The FAEMA E61 brew group does what it always does – delivers solid results, provided the conditions are right.
We used 18.5 grams input, ground with the Eureka Perfetto. The extraction runs clean through, no signs of channeling or uneven saturation. The shot counter ticks along, around 40 grams of espresso lands in the cup. The taste? Delicious. Sweet, balanced, complex. The temperature stability is noticeable in the taste – no burnt notes, no under-extraction.
For a machine without flow control, a very good result. The consistency is the highlight.
Milk Foam & Steam: A compromise
This gets a bit complicated. At 113 to 114 degrees boiler temperature (which corresponds to 93 degrees brew temperature) the steam wand has decent power, but could use a bit more punch. We get rotation, the foam becomes fine-pored and creamy, but it takes a bit longer than with commercial machines.
Then we increased the boiler temperature to 116 to 117 degrees. Immediately: noticeably more power, faster steaming, more force on the wand. But: the brew temperature rises by about one degree. That's then a bit too hot for lighter coffees.
That's the classic dual boiler compromise. You have to decide: do you want optimal brew temperature or maximum steam power? It depends on your preferences. Lighter coffees tolerate higher temperatures better, dark roasts are better brewed cooler. At 93 degrees brew temperature the steam performance works for home use, it's not a speed record, but absolutely doable.
We steamed milk with UHT milk – for practical reasons in courses, not because we recommend it. The foam still turns out well.
Workflow & Operation
Operation is simple. Turn on, wait, go. The display is easy to read, the PID controller intuitive. The shot counter starts automatically with extraction – practical if you want to keep track of your pull times.
The portafilter locks cleanly into the E61 group, no wobbling. The water tank with 2-liter capacity lasts several days, can be filled from the top. That's comfortable.
Small criticism: the drip tray grid. Depending on how it sits, it vibrates from the rotary pump. You can hear it. That's because there's no magnetic function to hold the grid stable. On many machines the insert box sits tighter thanks to magnets and vibrates less. That would be good feedback for Viktor – should be easy to fix.
Otherwise the machine is fun to use daily. No frills, everything reduced to the essentials.
Special Features: Rotary Pump & Horizontal Boiler
The rotary pump is a real plus. It runs quietly and allows connection to mains water – for anyone who wants to operate the machine permanently without constantly refilling water. Plus, the pressure is more consistent than with vibration pumps.
The horizontal 3-liter boiler is unusual but cleverly executed. It provides the thermal mass you need for temperature stability but fits in the flat housing. That's engineering – Viktor knows what he's doing.
Value for Money: 2,450 euros vs. 200 euros?
Now the question we have to ask: why spend 2,450 euros on this machine when the DeLonghi Dedica EC685 for 200 euros also makes a decent espresso?
The answer has several levels:
Appearance and presence: A machine like the La Basilea doesn't belong in the kitchen, it belongs in the living room. It's a statement. That shouldn't be the deciding argument, but it's part of the equation.
Error forgiveness: With the Dedica you need to know exactly what you're doing. The machine forgives little. Those with a lot of experience can get good espresso from it. Those with little experience struggle. That's almost stupid – actually it should be the other way around. Beginners need good equipment to gain confidence and learn what good espresso tastes like. The La Basilea gives you that confidence. It's temperature stable, it forgives mistakes, it delivers consistent results.
Capacity: With a 3-liter boiler you're a tractor. The machine doesn't buckle. You can pull espressos for the whole family, steam milk until you drop, the machine stays stable. The Dedica is great for one espresso in the morning. For more it gets tight.
Durability: Components like the rotary pump, the large boiler, the E61 group – these are parts that last for years, that are repairable, that you understand. That's an investment, not disposable.
Our goal is not for you to spend 10,000 euros on a Kaffeemacher. Our goal is for you to make good coffee at home. No matter what method. A machine like the La Basilea gives you the confidence that you're on the right track.
Conclusion: Swiss precision, Italian craftsmanship
The La Basilea Uno is a solid dual boiler machine with clear strengths: temperature consistency is outstanding, build quality is decent, operation is simple. The 3-liter boiler makes the difference – more thermal mass, more stability, more capacity.
Strengths:
- Temperature consistency like a flat line (93.1 to 93.2 degrees consistently)
- 3-liter boiler for high capacity
- Rotary pump (quiet, mains water connection possible)
- PID controller with shot counter
- Solid build quality
Weaknesses:
- Drip tray grid vibrates (no magnetic function)
- Steam performance could have a bit more power at low boiler temperatures
- Dual boiler compromise between brew temperature and steam power
Who is this machine for?
For enthusiasts who want a reliable, temperature-stable machine without spending 3,000 euros. For anyone who needs capacity – multiple espressos in a row, milk coffee for the family, no problem. For people who like it simple: turn on, wait, go. No complicated menus, no gimmicks.
For absolute beginners? Not really. The Gaggia Classic or the DeLonghi Dedica are enough to learn. But if you know what you want and value consistency, you'll find a good partner here.
Would we buy it? If temperature stability and capacity are priorities: Yes. If we only pull one espresso in the morning: No, something cheaper would do. The La Basilea is for anyone who takes it seriously but doesn't want to go to extremes.
Tastes like Basel. Tastes like Italian craftsmanship. Fun to use.
Further links:
















