Home / Coffee knowledge / Lelit Bianca V3 in the Test: Dual Boiler with Flow Control
    Dualboiler
    Lelit Bianca V3 im Test: Dualboiler mit Flow Control

    Lelit Bianca V3 in the Test: Dual Boiler with Flow Control

    About the Bianca V3 from Lelit, we can speak from various perspectives and barista skill levels. It is a very good dual-boiler espresso machine that doesn't need to hide its core dual-boiler capabilities from any other dual-boiler in its price range. While the potential for adjustments and operating options is limitless, we can operate the Bianca V3 just as simply as any other espresso machine with a Faema E61 brew group.

    We write this so clearly and plainly at the beginning of this article so that all home barista beginners don't get lost as we dive into the depths and possibilities of the Lelit Bianca V3.

    You decide what the Bianca V3 is for you as an espresso machine and how you operate it. You can pull the brew lever and let the rotary pump work at standard pressure of 8–9 bar. Or you open up the world of flow rate, pre-infusion, and puck resistance.

    In any case, as a home barista you can grow with the Lelit Bianca V3. And the possibilities are virtually limitless. How the Bianca compares to the other Lelit models can be found on our overview page Lelit: all espresso machines and grinders in test.

    Where you can buy the Lelit Bianca V3

    We don't sell espresso machines ourselves. We stopped doing that three years ago so we can write about machines without our own sales revenue listening in. What we do instead: The following specialist retailers distribute the Lelit Bianca V3 and we can recommend purchases from these businesses. All offer the possibility to adjust the machine's offset.

    Germany: Stoll Espresso, Bohnendealer, Lücke-Technik, Coffee24

    Austria: Bohnendealer

    We search for specialist partners who we know do good work and provide good service, and we stay in close touch with the retailers mentioned. These are so-called affiliate links. If you order via one of these links, you don't pay a cent more, but we receive a small commission that we invest directly in new test equipment.

    We continue to search for competent partners in the DACH region for you.

    About the Bianca V3 test

    We bought our Bianca V3 model ourselves. When Lelit brought new color models of the machine to market, we were offered one for free for marketing purposes. We declined. We basically buy the espresso machines we test. In a few cases we have borrowed very expensive espresso machines, like the Faema Faemina, on loan. When this is the case, we make it clear. Beyond that, we have no consulting collaboration with Lelit and have tested this espresso machine like all other espresso machines to the best of our knowledge and belief. In addition to the espresso machine at hand, over the past years we have compared numerous Lelit Biancas in our home barista courses, taken detailed measurements of them (and adjusted the offset, more on that later).

    This test took a long time. This is partly because the Bianca V3 is a complex espresso machine. On the other hand, it's because we wanted to better understand and investigate the entire topic of flow rate control, pressure profiles, and their consequences on taste, as well as the changes to the coffee puck during brewing. This process is far from complete. Nevertheless, we are now at a point where we can present a first version of a Lelit Bianca test.

    Regarding the topics mentioned above, we are working on many further investigations that will occupy us for months or even years in some cases. That's why this test will continue to grow with our research and learning. Don't think of it as complete, but as a preliminary picture that describes the Lelit Bianca as an espresso machine.

    Do you have experience with the machine? Then write it to us in the comments. If you have questions about the machine, you can also reach us by email. However, we would be grateful if you first ask the community, because many people have the Bianca espresso machine at home.

    Test report and material collection for the Lelit Bianca V3

    Here is an overview of what will be published by us about the Lelit Bianca.

    • Long test video (German)
    • Videos in English and Spanish languages (publication to follow)
    • Material collection with curves, measurements, etc.
    • Test report

    In a nutshell – this is the Lelit Bianca V3

    • Flexible espresso machine that can grow with you. Good for beginners and with a steep learning curve for everyone who wants to dive into the depths of espresso brewing.
    • Quiet dual-boiler with sufficient power and good temperature stability.
    • Double flow rate control via paddle and electronic low-flow control.
    • Suitable for light, medium and dark roasts, short and long coffee drinks as well as milk steaming.
    • Smart in many ways, e.g. through repositionable water tank or quick heat-up time through override at startup.
    • Low power consumption without steam boiler. High energy demand with steam boiler.

    Technical specifications of the Lelit Bianca V3

    All values are our own measurements, not manufacturer specifications.

    Feature Value
    Type Dual-boiler with Faema E61 brew group
    Height 40.5 cm with paddle, cup tray at 38.5 cm
    Width 29.3 cm
    Depth 50.0 cm, with side-mounted water tank 41.3 cm
    Portafilter overhang 9.5 cm additional forward
    Weight 27.0 kg
    Brew boiler 800 ml, insulated
    Steam boiler 1.5 liters, can be switched off
    Water tank 2.5 liters, can be mounted left or right
    Drip tray 0.98 liters
    Pump Rotary pump, 8 to 9 bar, 61 dB
    Brew group 58 mm, 58.55 mm tamper included
    Heat-up time 17 minutes to target temperature and warm portafilter
    Brew temperature 93 °C, deviation 1 °C
    Standard deviation 0.99 ° (KM protocol, 17 min.) / 0.69 ° (WBC, 1 hour)
    Consumption without steam boiler 0.133 kWh for heating up plus 5 double espressos
    Consumption with steam boiler 0.4259 kWh for heating up plus 5 double espressos
    Flow control two needle valves, mechanical via paddle and electronic

    The dual-boiler and the Faema E61

    A "Faema E61 with dual-boiler" sounds at first as ordinary as many other espresso machines on the market. But the paddle on the thermosyphon already signals: "I'm different." No, not different like a La Marzocco Mini with fake paddle, which is nothing more than a brew start, but different, with manual flow rate control. And not only that: Lelit gives us in the V3 version a double needle valve that we can control manually and electronically. More on that later.

    Let's stick with the Faema E61 and the dual-boiler. The former is in principle so classic that we could refer to what feels like four dozen articles in our blog. Except for the inlet of the needle valve and the downstream pressure gauge, which shows the pressure against the resistance of the coffee puck.

    The Lelit Bianca V3 comes with a brew boiler of 800 ml and a steam boiler of 1.5 liters. This is mid-range in terms of size for boiler espresso machines and promises solid performance. The water is driven by a quiet rotary pump, which we measure at 61 decibels.

    The 2.5-liter water tank is a sign of what Lelit likes to do and does often: think outside the box. Symbolically for this, the water tank is not integrated into the espresso machine but hangs on the back. If we loosen one screw on top and one on the bottom, the tank can be removed and mounted on either the left or right side of the machine. Sounds nice, but what for? The Bianca gives you the flexibility to be positioned right or left-handed, and those without depth on their work surface will also appreciate the reduction of the back area. The water tank itself can only be removed from the top, but it retracts nicely and comes without hoses.

    Also striking: A dual pressure gauge for steam and brew pressure, the "Lelit Control Center" with PID control and many smart adjustment options.

    lelit bianca accessories

    Size, design and construction

    The Lelit Bianca comes standard in stainless steel with wooden handles and wooden paddle. Optionally, it's also available in white or black for a hefty premium. The aesthetics, for diplomatic reasons, lie in the eye of the beholder. We've heard everything from "old" to "stylish" about the Lelit Bianca. Fact is, the stainless steel variant, like all stainless steel powerhouses, seems to chronically attract fingerprints. When we tap against the machine, it sounds tinny. Other espresso machines in the same price range seem more solid in terms of material thickness. The white and black variants, on the other hand, appear much more robust, even if that's just the extra coating of the stainless steel body.

    The Bianca V3 is a compactly designed espresso machine with a height of 40.5 cm with the paddle. The cup tray of the machine is at 38.5 cm height. The Lelit Bianca has a width of 29.3 cm and a depth of 50.0 cm. However, the water tank can be mounted on the side, reducing the depth by 8.7 cm. Also to consider: The portafilter protrudes forward and adds 9.5 cm to the depth. The machine weighs 27.0 kg.

    We've already mentioned the low noise level of the Bianca. In addition to the quiet pump, rubber stoppers in many transition areas are responsible. Whether at the drip tray grates, the cup tray or the water tank lid, rubber bumpers prevent vibrations and thus noise everywhere.

    Below the drip tray we notice sharp edges. However, the visible edges are each curved and thus unproblematic. The drip tray holds 0.98 liters.

    Included accessories

    The included accessories for the Lelit Bianca are impressive. In addition to a bottomless portafilter, the typical Lelit portafilter with two spouts is also included. These are positioned so close together that they are also well suited for extraction into a single espresso cup. Therefore, it can also be used as a single portafilter. However, the proximity of the two spouts requires precise aiming to fill two cups. Since the distance between the spout and the drip tray is quite high, an included grid lift makes aiming easier. The only challenge might be balancing a scale on top of it.

    Also included are a water filter cartridge, which is not recommended in our test of filter cartridges, a blind basket, a plastic spoon (why?), as well as an 18-basket and a 20-basket.

    We're particularly pleased with the polished tamper, which according to Lelit has a diameter of 58.55 mm and sits almost flush with the included basket. The distance to the edge is only 0.4 mm. By the way, the portafilter mount of the Lelit Bianca is 58 mm as standard, so many portafilters are compatible.

    Also included are a mains water connection set, a microfiber cloth and an additional 4-hole tip for the steam wand.

    paddle and cups

    Lelit is smart: 17-minute heat-up time and a convertible water tank

    Again and again, the manufacturer Lelit from Baitella, Brescia, Italy surprises with that extra mile. Faema E61 espresso machines are as common as sand on the beach, and most of them work pretty much the same. But Lelit not only relies on this proven technology, it doesn't stop there. The engineers at the company are always looking for smart solutions to make the machine better.

    This shows in the details, like the forward-curved portafilter, which shows the home barista the creamy flowing espresso. It goes deeper when we look at the control options of the LCC or the strategic overheating at machine startup. Lelit deliberately heats the brew boiler above the target temperature to warm up the portafilter faster, then lets the temperature drop back to the desired level. This results in the Lelit Bianca having a heat-up time we measure at 17 minutes until target temperature and heated portafilter are reached. That's about 8 to 12 minutes faster than the average Faema E61 portafilter espresso machine.

    The double flow rate control, the programmable pre-infusion, and the convertible water tank outside the machine are further evidence that even a proven system can tolerate innovative thinking.

    Access to the boiler below the machine makes maintenance of the Lelit's heating much easier since the boiler doesn't need to be removed.

    69 10sec lowflow start

    10 seconds low flow at start (slow flow rate).

    Flow rate control squared

    The Lelit Bianca V3 is equipped with double flow rate control. An upstream needle valve can be programmed for low and normal flow (low flow = low flow), and a downstream needle valve can be used with a paddle for further flow reduction.

    It's amazing how little is said about the flow rate of water in espresso machines, considering how important it is for drink preparation. Pressure is often specified, and not infrequently, especially with cheap espresso machines with vibration pumps, there is boasting about a pressure potential of 15 bar. High pressure is not synonymous with good coffee or even uniform extraction.

    Pump excursus

    Pressure is generated via the pump of the espresso machine. Cheap espresso machines are equipped with a vibration pump, which implements the speed of water delivered to the portafilter relatively sluggishly, then realizes pressure buildup against the coffee. A rotary pump gets up to speed faster, and accordingly the pressure buildup against the puck and on the gauge is noticeably quicker. With rotary pumps we set the grind a little finer. Nevertheless, the first extraction drops often appear after 5 to 6 seconds. With the vibration pump we usually wait over 8 seconds. The third, very rarely used pump is the gear pump or gear pump. This pump allows its "pressure application" in relation to be regulated up and down. The vibration and rotary pumps typically deliver the set pressure relatively statically. However, espresso machines like the Decent or San Remo YOU show that more flexibility is possible with these pumps than is often used.

    We can reduce the realized pump pressure on the coffee puck by reducing the flow rate after the pump through valves. In the case of the Lelit Bianca, two needle valves are used for this. Figuratively speaking, the needle valves tighten on the hose. But why does Lelit equip the Bianca with two needle valves? And what is the consequence of the reduced flow rate, which also expresses itself in the pressure on the puck?

    Low flow means even extraction?

    Yes and no. The extraction of an espresso can be divided into different phases: a saturation phase, in which the brew water saturates all the coffee, a main extraction phase, and finally a phase in which the extraction ability of the coffee puck decreases and the resistance of the coffee puck drops rapidly. This knowledge helps when using espresso machines with flow rate control to modulate the flow.

    If we don't brew an espresso at full pressure of 8 to 9 bar against the puck, but instead at, say, 6 bar, it's easier to achieve more even extraction. High pressure increases the likelihood of channeling and also reduces the resistance of the coffee puck more quickly. However, we can't get everything out of the coffee with low pressure.

    However, those who don't want to spend a lot of time on careful puck preparation are generally better off with lower brew pressure. However, the reduction of pressure is not limitless possible, because if the pressure built up against the puck drops too much, the extraction is reduced or the strength of the coffee drink is too low. Taste-wise it will no longer be perceived as espresso.

    Low pressure at the beginning

    Low pressure at the beginning, in conjunction with very low pressure, allows complete water saturation of the coffee puck. If this can be achieved before full brew pressure is released, more even extraction is guaranteed. If dry pockets remain in the coffee puck, the following water will avoid them. Dry coffee is basically water-repellent (hydrophobic) until it's saturated.

    If a pressure increase follows the complete saturation, the coffee puck can offer long even resistance, provided it was carefully prepared and compressed.

    paddle lelit bianca open

    Manual flow rate control

    The flow rate of the espresso machine can be controlled manually using the Lelit Bianca paddle. Home barista have almost all options available here. First, the brew lever of the espresso machine must be pulled.

    When the paddle is at 9 o'clock, hardly any water flow is delivered. When the paddle is at 6 o'clock, we measure without resistance 2.5 to 2.8 g/s on the scale. At 3 o'clock we determine a flow between 4.9 and 5.1 g/s. With the paddle completely open we achieve just under 6 grams per second of flow on the scale.

    Important: These values are each not measured against pressure. Against the standard pressure of our Scace portafilter, the pressure expresses itself as follows:

    With the back pressure of the Scace we measure at 6 o'clock a flow of about 2 g/s and 4.8 bar pressure. At 3 o'clock we achieve 2.5 g/s with 7.5 bar pressure against the Scace. Completely open we reach between 2.7 and 2.8 g/s with 8.1 bar pressure. These values should be interpreted with caution. The water flowing out of the Scace is sprayed on the cup base with relatively high pressure, which negatively affects the accuracy of the scale.

    The pressure values with the Scace only give an approximate picture of what happens in a portafilter and when using coffee. During coffee extraction, the resistance of the coffee decreases over the course of extraction.

    For your Lelit at home, it's important that you adjust the needle valve settings and thus shape the flow for each area.

    Tips for working with the paddle

    To achieve repeatable results, we basically recommend working with fixed positions. A changing pressure on the gauge is normal because the resistance of the coffee puck decreases with brewing time.

    By the way: If the paddle is not exactly at 6 o'clock, it has only minor effects. However, alignment with fixed points still makes sense.

    The paddle also offers options to "repair" extractions. If water shoots through the puck too quickly, a bold grip can reduce the flow rate and thus slow down the extraction. Taste-wise it will taste better than thin super-under-extraction.

    Electronic flow rate control

    While the V2 of the Lelit Bianca was only equipped with manual flow rate control, the V3 version has additional electronic control. This not only gives the machine many new possibilities but also allows defining fixed profiles and processes. The reproducibility of extractions has increased significantly.

    The electronic needle valve control is not as flexible as the manual one. Essentially, two "low-flow" phases can be defined: one at the beginning and one at the end. At the beginning, the duration of low flow is set. At the end, the beginning of low flow is set.

    We measure approximately 1.5 - 1.7 g/s and 3.1 bar with Scace resistance in the low-flow phase.

    Nesting of electronic and manual flow rate control and pre-infusion

    By nesting manual and electronic flow rate control, additional operating possibilities of the Lelit Bianca can be unlocked. For example, low flow can be further reduced through the use of the paddle.

    Programmable pre-infusion offers further possibilities. By activating pre-infusion, a pause function is unlocked. If pre-infusion is not further nested with low flow, the Bianca starts with normal flow and pressure and then pauses for a selected time.

    It makes sense to combine the pre-infusion time with a low-flow time. For example, 10 seconds of pre-infusion could be combined with 10 seconds of low flow and a subsequent 5-second pause.

    Bianca V2, V3, and V4: what's different

    The versions of the Bianca can be distinguished by the extent of flow control. The V2 had only the mechanical paddle. The V3 tested here additionally has the electronically controlled needle valve, so the programmable low flow, and thus much better reproducibility. Those coming from a V2 and working only with the paddle gain little. Those wanting to call up profiles gain a lot.

    We don't have our own measurements for the Bianca V4 yet. What we can write about once we've had it in the lab will be added here.

    Does the Bianca have Pagaia?

    No. Pagaia is Lelit's new flow control, which was introduced in 2026 in the Mara X3 as well as in Elizabeth 3 and Victoria 3. The relationship is there in terms of content, but the technical approach is different: The Bianca reduces flow behind the pump via two needle valves, so the water is slowed down. Pagaia, on the other hand, controls the pump itself via pulse width modulation and delivers less water from the start. Both aim at the same thing, namely control over flow instead of pressure. The Bianca is thus the machine that started this thinking at Lelit. How Pagaia works is explained in our article on Lelit Pagaia.

    Espresso quality potential

    We've talked about the possibilities of espresso preparation. Of course, we ourselves still need to do the work, adjust the grind on a good grinder, and prepare the espresso cleanly. If that works, the espresso will work too. The Lelit Bianca V3 provides all the requirements for good espresso. The options discussed above are pathfinders for this, as is the good temperature stability that we'll discuss next.

    We're often asked whether a particular espresso machine "fits" certain coffees. And indeed, there are some espresso machines that show their strengths with rather lighter or darker roasts. We give the Lelit Bianca the distinction: "can do it all." From a complex Doña Margarita from our Lila line through the more robust all-purpose Dreispitz to filter coffee brewed as espresso – with the Bianca and its adjustment options you can basically brew anything.

    Lelit Bianca Heat-up time KM protocol

    Temperature stability

    Looking at temperature, three questions are interesting:

    • How quickly does the espresso machine heat up?
    • How stable is the temperature during extraction?
    • How stable is the temperature from extraction to extraction?

    To monitor temperature stability and heat-up time, we use the Scace 2 with a K-type sensor and a PCE-T 330 data logger. We record both the WBC protocol and the KM protocol, which we use to monitor warm-up, e.g., at 15, 20, or 25 minutes. In between, we let the espresso machines cool down completely for a full day. A really complex test protocol.

    According to our measurements, the Lelit Bianca reaches its target temperature of 93 degrees Celsius (+/- 1 degree Celsius) after 17 minutes. While the first temperature in our measurement had a mean of 92.03 degrees, the temperature increased over five extractions at one-minute intervals to 93.16 degrees. The standard deviation over these five extractions, measured from second 4 to 25 of extraction, was 0.99 degrees at the KM protocol after 17 minutes. That's a good value.

    In the WBC protocol measurement after one hour of operation, we get a standard deviation of 0.69 degrees Celsius. With this, the Lelit Bianca is not far from the World Barista Championship target specifications of 0.55 degrees Celsius.

    We can confirm very good temperature stability of the Lelit Bianca from extraction to extraction and during extraction. With longer downtime, we recommend, as with all Faema E61 brew groups, a purge shot before extraction.

    lelit bianca wbc temperature protocol

    Setting offset: 4 to 8 degrees deviation from factory

    The biggest and most important problem to watch out for is the sometimes massive offset. Over the past six months we've measured over 20 Lelit Biancas. The Bianca is also frequently used by participants in our home barista courses at our academy. We also use this opportunity to check the temperature of the espresso machines. Of course, we want to send our course participants home with a well-calibrated espresso machine too (all home barista participants bring their espresso machine with them as standard).

    The offset of the Lelit Bianca is usually between 4 and 8 degrees Celsius. In all cases so far this was negative, meaning the machine was effectively too cold. Offset means that there is a measured deviation between the temperature displayed on the PID control and the actual brew temperature. To rely on the temperature display, verification of the temperature by a specialist dealer is essential. Be careful with online purchases – a properly set temperature is not likely.

    The offset of the test machine was 6 degrees Celsius. This meant that at a displayed temperature of 93 degrees we actually had a brew temperature of 87 degrees. It's important to note that the control knows two offset values: one on the user interface and one in the technician or submenu. The latter value is the one that needs to be adjusted.

    cappuccino lelit

    Steam and milk frothing performance

    From a dual-boiler for over 2000 euros, we expect not only good frothing performance but of course also parallel frothing while extracting espresso. What feels confirmed during frothing can also be visualized objectively. The frothing performance – and again the range of options that Lelit has provided – makes it possible for us to tailor the Lelit Bianca to everyone's needs.

    To assess steam power, we use 300 ml of cold 20 degree water and test how long it takes to heat it to 60 degrees.

    In standard settings with 125 degrees boiler temperature, we need 47 seconds with the standard 2-hole nozzle. If we want more power, we set the Bianca to 135 degrees. The same exercise is then completed in about 36 seconds. Those wanting even more pressure switch to the 4-hole nozzle, which is also included. Now we need 25 seconds to heat 300 ml to 60 degrees.

    As mentioned: The Lelit Bianca can be the frothing partner everyone wants. Those wanting to froth well and confidently set it to 4-hole at 135 degrees. Those preferring to take their time working through the frothing phases stay at 125 degrees and try with the 2-hole nozzle.

    energy consumption lelit bianca

    Lelit Bianca energy consumption

    Depending on how espresso machines are used, the energy consumption of espresso machines varies. Espresso machines consume power primarily when they heat the boilers to temperature. The power consumption of a pump or displays is small compared to the power-hungry boiler heaters.

    Those who only drink espresso consume significantly less electricity than cappuccino drinkers. Provided the usually larger steam boiler can be switched off. With the Lelit Bianca this is possible. If we only switch on the 0.8-liter insulated brew boiler, energy consumption is significantly reduced. We come to 0.133 kWh consumption for heating and preparing 5 double espressos. Preparing one espresso consumes 0.1194 kWh in this scenario, accounting for and including the heat-up.

    If the steam boiler is switched on, consumption is more than three times as high. We measure 0.4259 kWh, using the same criteria with heat-up and 5 double extractions. Preparing one cappuccino including heat-up amounts to 0.34616 kWh.

    Conclusion on the Lelit Bianca V3

    Looking at the overall performance of the Lelit Bianca, recognition stands out for a consistently very good espresso machine. Few wishes remain unfulfilled, as the overall package is right. The variety of adjustment options and variants in flow rate control, the LCC capabilities, the good technical implementation, and the extensive included accessories make the Lelit Bianca an outstanding espresso machine. Added to this is the fact that the espresso machine is very competitively priced, and not only when we look at the overall package in relation to other dual-boiler espresso machines.

    Only a few wishes remain that would make the Lelit Bianca the perfect espresso machine: precise and good factory presetting of the offset, slightly more material thickness on the flanks, optimized energy use when using the steam boiler, and finally, a quiet wish for a flow meter and thus a programmable extraction stop.

    Honestly, it might even be good that the Lelit Bianca can't do that either. Because even now, espresso machines in the same price range have great difficulty keeping up with the Lelit Bianca.

    At the beginning we asked who the Bianca is the right machine for. Even at the end we would say: It's an espresso machine that can grow with you, and therefore we have no reservations about recommending this investment even to espresso beginners.

    How the Bianca compares to Elizabeth, Mara X, and other Lelit models can be found on our overview page Lelit: all espresso machines and grinders in test.

    Frequently asked questions about the Lelit Bianca V3

    Does the Kaffeemacher portafilter fit the Lelit Bianca?

    Yes. The Bianca has a 58 mm mount to E61 standard, so our portafilters fit. Both our bottomless 58 mm E61 portafilter and the 58 mm E61 double spout portafilter can be inserted directly. The double spout is especially interesting if you have trouble hitting two cups with the included Lelit portafilter because its spouts are very close together. The bottomless portafilter is the tool with which you can even see channeling, and thus the most sensible first addition if you want to work with the Bianca's flow control.

    Which baskets and shower screen can I use?

    Included are an 18-basket and a 20-basket as well as a blind basket. Because the Bianca follows the 58 mm standard, standard precision baskets and shower screens for E61 brew groups fit. If you're working on the puck anyway, it's worth looking at our baskets. Lelit did well with the tamper, the included polished tamper is 58.55 mm and leaves only 0.4 mm distance to the basket edge.

    Can I connect the Bianca to mains water?

    Yes, a mains water connection set is included. The Bianca has a rotary pump, which makes mains water operation technically obvious. If you stick with the tank: It holds 2.5 liters, hangs on the back of the machine, and can be converted left or right with two screws, reducing depth by 8.7 centimeters. In any case, make sure to use appropriate water, we don't recommend the included filter cartridge based on our testing of filter cartridges.

    How much space do I need for the Bianca?

    Plan on 29.3 centimeters width and 40.5 centimeters height with the paddle. Depth gets interesting: 50.0 centimeters with tank on back, 41.3 centimeters with side-mounted tank. Add 9.5 centimeters because the portafilter protrudes forward. If your work surface is under a wall cabinet, check the height above the cup tray, which is 38.5 centimeters. The weight of 27 kilograms is more of an argument for choosing the location once and for all.

    Bianca V3 or Lelit Elizabeth?

    The decision comes down to flow control, not steam. The Elizabeth PL92T is a true dual-boiler from about 1,050 euros, it can do espresso and milk in parallel and is at temperature after 20 minutes. But it has no paddle and no programmable low flow. If you want to modulate extractions, there's no way around the Bianca. If you just want good espresso and cappuccino, the Elizabeth is the more sensible choice and you save more than half.

    Bianca V3 or Mara X3 with Pagaia?

    The Mara X3 costs 1,699 euros and brings flow control via Pagaia, but it's a heat exchanger two-group machine, not a dual-boiler. In our measurements, the Bianca has significantly better temperature control: 0.69 degrees standard deviation in the WBC protocol, while the X3 in the same stress test over 14 extractions spans a temperature window of 7 degrees. Those wanting flow control and temperature stability take the Bianca. Those with less space and less budget take the X3.

    What color variants are available and is the premium worth it?

    Standard is stainless steel with wooden handles and wooden paddle, plus there are coated variants at significant premium. A practical argument beyond taste: The stainless steel variant chronically attracts fingerprints, the coated variants appear more robust and are easier to keep clean. Whether that's worth the premium is up to your cleaning motivation.

    Where do I find the user manual and offset adjustment?

    Settings are done via the Lelit Control Center, the PID control on the machine. Important for temperature: The control knows two offset values, one on the user interface and one in the technician or submenu. You need to adjust the one in the submenu. Because the offset from factory is 4 to 8 degrees negative, it's worth having that done by the specialist dealer or checking it yourself with a measuring portafilter.

    What does the Lelit Bianca V3 cost?

    It's over 2,000 euros, with the exact price depending on version and color variant and varying considerably in retail. We deliberately don't quote a daily price, but refer to the specialist retailers listed above. More important than the last euro: Buy where the offset is adjusted for you.

    Appendix and supplementary materials

    Pressure and flow rate measurements

    Below we show you some ways the Lelit Control Center can be used to run different profiles. These curves were recorded using the Espresso Smart Sensor and its accompanying app. However, we used a Scace 2 as the portafilter. The curve would look slightly different with coffee because the resistance decreases when using coffee. The resulting pressure on the puck would decrease. We find this visualization helpful for showing the principle of the different curves.

    67 5sec preinfusion and 5 sec pause

    5 seconds pre-infusion with subsequent 5-second pause.

    73 5sec preinfusion 5sec pause with 20sec lowflow and after total 40 sec low flow again

    5 seconds pre-infusion, 5 seconds pause with 20 seconds low flow. After a total of 40 seconds low flow again.

    74 low flow preinfusion 5sec 5sec pause 1

    5 seconds low flow pre-infusion, 5 seconds pause.

    As always, we bought this espresso machine ourselves. This test was not requested by Lelit.

    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy