Between us stands the Ligre Youn – an espresso machine that looks more like a designer furniture piece than a classic Kaffeemacher. In fact, the Youn positions itself as a genuine design statement and has already won high-profile awards for it (including gold at the German Design Award and an iF Design Award).
Naturally, our curiosity was correspondingly high: An espresso machine in the ~4,000-€ league that visually strikes a radically minimalist note and boasts innovative technology. Our initial impression after several days in the test lab was mixed. On the one hand, enthusiasm – the engineering prowess and technical ideas behind the Youn impress.
On the other hand, we also felt some frustration: As advanced as the hardware is, we felt initially limited in controlling the machine. In the following experience report, we examine the Ligre Youn in detail – factually substantiated, but also with a personal touch from the perspective of two experienced espresso machine testers.
To the test of the matching grind-by-weight espresso grinder Ligre Siji.
Ligre Youn in a nutshell
The Ligre Youn is equipped with a thermoblock for heating the brewing water, heating cartridges in the group for faster heating, and a 0.8 l stainless steel boiler for milk frothing. Two vibration pumps allow simultaneous frothing and brewing.
The Ligre Youn is technically capable of controlling itself with flow and pressure targets. Three brewing profiles are preset, but cannot be overwritten or edited. The Easy Mode brews one of the three preset brewing profiles with exact volumetrics at the push of a button. A smart Guided Mode makes brewing very easy and accessible for all espresso beginners.
This accessibility and simplicity is the best feature of the Ligre Youn for us. The second best is the excellent automatically frothing steam wand, which can also be manually controlled. It froths automatically and manually very well – that's a pleasure! Less pleasure comes from the temperature offset of 3 to 4 degrees. The programmed brewing profiles don't convince us either.
Buy Ligre Youn
The following specialty retailers* carry the Ligre Youn and we can recommend purchasing from these businesses.
Germany: Stoll Espresso
* We search for specialty partners for you, knowing they deliver good work and good service. We are in close exchange with the dealers. These are commission links. If you order through this link, it costs you nothing more, but we receive a small commission that we invest in new test equipment.
Origin and manufacturer
Ligre is a new name in the espresso market, but not an unknown manufacturer. Behind the machine stands the renowned supplier Gronbach. Gronbach, a German-Austrian family business, has decades of experience manufacturing high-quality household appliances for renowned manufacturers. With the Ligre brand, they now take the step of operating under their own name and putting their accumulated know-how into their own product. The Youn is manufactured entirely in Germany and Austria.
The local manufacturing approach (short transport routes, rigorous quality controls) also fits the company's sustainability philosophy. It's good to see that an espresso machine "Made in DACH" is back on the market. Ligre positions the Youn as the first strike of a new product line – accompanied by the matching grind by weight espresso grinder "Siji" – aiming at both design-conscious coffee lovers and ambitious home baristas. "Siji" means "one" in Javanese and "youn" derives from the Haitian Creole word "yon", which also means "one". So we can probably expect more machines from the house. A test of the Siji will follow. We've postponed it because important upgrades are still planned.
Technical specifications
The Ligre Youn goes all out technically. The heart is a hybrid heating system: for espresso extraction, a thermoblock is used, while a classic boiler is responsible for steam. This combination aims to combine the best of both worlds – quick heat-up time and temperature stability during extraction thanks to the thermoblock, while also providing sufficient power and reserves for consistent steam when frothing milk through the boiler. Indeed, the machine is very quickly ready to operate after switching on. Officially, Ligre claims only 4 minutes until it's ready to brew. In our test, it was actually about 5–6 minutes until everything was really heated through – still an excellent value compared to the 15+ minutes of many classic dual-boiler or dual-boiler machines.
Two vibration pumps are installed for simultaneous operation of the brew group and steam wand. One pump supplies the thermoblock and delivers water to the brew head, the second maintains pressure on the steam boiler or delivers hot water for Americano etc. Both pumps are electronically controlled (keyword pressure profile), so the Youn is capable of pressure and flow profiling. In other words: theoretically, pump pressure and flow rate can be precisely controlled to map different pressure profiles during espresso extraction. This is supported by two flow meters in the cold water inlet, which also enable volumetrics. In practice, this means: the Youn can dose a previously defined amount of water extremely precisely and automatically stop the extraction. We actually experienced this precise volumetrics as exemplary in the test – we could rely on the programmed amount landing in the cup without always having to check with a scale. For consistency fans and those who like reproducible results at the push of a button, that's a big plus.
Volumetrics rating: 9 out of 10 points. At most a fully integrated scale can do better.

Temperature of the Ligre Youn
What about the temperature? The brew group (58 mm E61-compatible, solid brass) has a regulated heating system designed to maintain the target temperature at the brew head. In our test, however, a temperature offset problem became apparent: the brewing temperature set on the display does not match the actual water temperature in the portafilter. Specifically, we found that the actual brewing temperature was about 3–4 °C below the displayed value. For example, 96 °C on the display only yielded about 92–93 °C in the coffee puck. This offset was reproducible on two test units, so we assume all currently shipped Youn machines exhibit this behavior. Ligre apparently measures at the top of the brew head; by the time the water reaches the bottom, it cools slightly – which explains the difference.
For practical purposes, this means: set the temperature higher! We recommend programming 2–3 °C above your actual desired temperature, depending on the situation. If you want about 93 °C in the puck, you should set 96 °C. If you're in a hurry and brew 5–6 minutes after switching on, prefer 97 °C; if the machine has been warming for a while, 95–96 °C will suffice. This compensates for the offset and gives you the right temperature in the cup – even if it's somewhat irritating to see significantly higher values on the display temporarily. We very much hope that Ligre will address this via software update, as the hardware would have potential for pinpoint temperature control. The fact that apparently the brewing temperature was never properly checked in the puck during development using the industry standard Scace test basket leaves us with some questions.
Additionally, due to the pre-infusion, brew pause, and sluggish vibration pump, the Ligre Youn delivers water very slowly. This means the measuring probe doesn't provide accurate readings until about 10 seconds in. Once the Ligre is on flow and pressure, it delivers good values. The standard deviation between extractions then falls below 1 degree. However, it should be noted that this is based on a smaller data set than our classic standard deviation calculation from second 4 to 25.
Temperature rating: 9.5 out of 15 points.
Size and accessories
At 45 cm wide, the Youn is unusually sprawling to the side, but at about 30 cm deep it's quite slim in design. The height is around 40 cm, including the raised housing area on the right where the boiler sits and the display is housed. At roughly 18 kg, the machine sits stably on the work surface – moving it definitely requires some muscle. The housing is made of anodized aluminum in an elegant silver-beige tone (there's also a black variant), and the craftsmanship looks high-quality.

The removable water tank holds 1.6 liters and hides in the back of the housing. Clever: it has an integrated handle and can be pulled out for filling. Less clever: it gets tight under hanging cabinets – if there's little space above, getting the tank out becomes difficult, especially since it must be removed from behind the control buttons. Here you may have to refill from the front with a pitcher.
Somewhat amusing is that Ligre itself positions the machine under hanging cabinets in some promotional images, where water tank removal would be at least challenging.
The Youn package includes, among others, a 58 mm portafilter (double spout), a matching tamper made of stainless steel, as well as single, double, and blind baskets – solid standard accessories without special extras.
The tamper has a clearance of 0.65 millimeters to the basket edge. That's a good value. Haptically, however, the tamper is less impressive. It doesn't seem designed like a tamper to be pressed from above, but rather like one held by the handle as a hammer. A questionable design choice, especially if someone seriously presses with 15 kg of force, as Ligre recommends in its Guided Mode.
The classic baskets are also found in the package of cheap espresso machines several price tiers below the Ligre. They're not cylindrical and the holes don't reach the edge. A sensible upgrade to the machine would be replacing the baskets with precision baskets from VST or our KM Pro baskets. The portafilter is brass-plated and well-balanced.
Accessories rating: 3.5 out of 5 points
Hybrid machine in terms of convenience and heating
The Ligre Youn is a hybrid machine in two respects. On one hand, it's technically a hybrid machine, on the other hand through how it tries to position itself in the mid-segment between the portafilter espresso machine and the fully automatic machine (piston-driven coffee maker).
Halfway between portafilter and fully automatic
Fully automatic machines offer convenience and yet freshly ground coffee. A big difference from, for example, capsule machines. Making coffee is done at the push of a button and demands nothing from the user. The result in the cup from household fully automatic machines is 50 - 70% of the possible quality of the coffee.
The portafilter, on the other hand, is initially complicated. You have to grind separately and adjust the grinder. Tamping, water amount, and possibly even temperature are parameters you can influence. The flavor potential is 100% depending on the machine, but the downside is also 50% of the possible quality of the coffee. If you don't engage with a classic espresso machine, you'll drink decent coffee, but still not be satisfied. The feeling then says: you didn't get everything out of it because you didn't know better.

Operation and user experience
The Ligre Youn wants to make both beginners and advanced users happy – a balancing act that becomes clear in operation. There are essentially three modes: Easy Mode, Guided, and Nerd Mode.
However, the different modes are not far apart and access to control options is limited everywhere.
The Guided Mode takes you as a user by the hand and explains more or less precisely and more or less carefully which steps you should take on the path to making an espresso. It asks whether you want to grind the coffee yourself, suggests a quantity depending on the basket, and finally, after you've clicked through the flowing text, begins brewing. While the instructions are purposeful and could use some improvement, the strength of the mode begins with brewing and is one of the greatest strengths of the machine. If the Ligre Youn encounters coarsely ground coffee, or if pre-ground coffee is actually used, then the Youn regulates its flow downward. This prevents the water from rushing through the coffee at full speed and the coffee turns out significantly better than with an "uncontrolled blow-through extraction". To return to the picture drawn above: the espresso will reach qualitatively about the 70% quality that's possible with a well-adjusted and functioning fully automatic coffee machine. The Ligre can do this due to sensitive sensors that detect when the coffee is flowing too quickly. This function at this quality is almost unique on the market. Few other machines can do that. The fact that the Ligre falls back on one of the brewing profiles to be discussed is suboptimal.
In Easy Mode we skip the introductory text, select a Sensory Profile, and start brewing. The Sensory Profile is one of three selectable brewing profiles, all of which start with a pre-infusion, have an adjustable brew pause, and then continue the profile. In Easy Mode, the machine stops when the programmed fill amount is reached.
The Nerd Mode allows the same settings as Easy Mode. And honestly, no additional ones. The only extra function in Nerd Mode is that you have to end the brew yourself and have a more detailed display. The display now shows you the amount of coffee already brewed, the current pressure, and the milliliters per second being brewed. The Nerd Mode is more accurately put, a Nerd Display Mode. I don't have access to flow or other parameters – certainly not during brewing. The mode is activated when the button is pulled rather than pressed.
So far so good, one might think. We don't necessarily need to control everything if what's in place convinces us. But what we already saw with the poor temperature setting repeats itself with the brewing profiles we MUST choose.
Volumetrics rating: In the volume-controlled modes, the Ligre's accuracy is excellent. Despite different flows, we only measure deviations of maximum one gram from the programmed target amount. This is only possible with an integrated scale and leads to 9 out of 10 possible points in our rating.

Brewing profiles and pre-infusion – wasted potential
Here's the crux: the Ligre Youn offers three pre-programmed brewing profiles, "Mellow Morning", "Vibrant Vigor", and "Brilliant Bolt", which promise different pre-infusions and pressure curves. In practice, however, these presets prove to be coffee-technically underdeveloped.
Mellow Morning works with only 2 ml pre-infusion, Vibrant Vigor with about 8 ml, and Brilliant Bolt with around 16 ml. When we first heard that, we thought: 2 ml pre-infusion per second - great! 8 ml per second - oh, interesting. 16 ml per second - somewhat wild. When we then began working with the machine, we discovered: no – this is the total amount of pre-infusion water…
In our view, these amounts are far too small to really saturate the coffee puck evenly. An effective pre-infusion should include approximately 1.5 to 2 grams of water per gram of coffee so that the coffee grounds are completely saturated. For a typical double shot with, say, 16 g of coffee grounds, you'd need around 24–32 ml of water to fully saturate the puck – values the Ligre profiles are far from.
The result: Much of the coffee powder remains dry even during the pre-infusion. The subsequent extraction encounters unevenly saturated coffee, which can lead to channeling and uneven extraction. In short, the machine limits itself here and fails to realize the possible flavor potential of the coffee.
Additionally, all three profiles use a brew pause that in our eyes is unnecessary in this form. We can hardly think of a reason why a brew pause would make sense when preparing espresso. For a machine that builds pressure and flow so slowly at the beginning of brewing, the brew pause seems even more out of place. Especially when not all the coffee is saturated. Then the already saturated coffee works during the brew pause, while the bulk of the coffee in the basket hasn't even made contact with water yet. We set the brew pause to the lowest possible time to minimize damage to the extractions.
When brewing filter coffee, we often brew with a brew pause. This gives the CO2 created by roasting a chance to escape. In a closed system like the basket, this is not possible and would especially displease crema aficionados.
Speaking of pre-infusion. Vibration pumps already have a much slower pressure build-up than rotary pumps. We question the necessity of pre-infusions at minimum. If performed, it should saturate all the coffee relatively quickly and without pressure during the pre-infusion time.
What do the profiles do after the pre-infusion and brew pause?
Brilliant Bolt initially even goes above the set brewing pressure – according to the manufacturer – to 9 bar and then reduces the pressure by 1 bar after a few seconds. We initially measured a pressure between 9.5 and 10 bar, then a reduction to 8.5 to 9 bar.

This behavior resulted in our tests in the coffee puck being literally "blown apart" – the result was often severe channeling and unbalanced flavor. We therefore mostly used Mellow Morning, as this profile, while also not ideal with its minimal pre-brew water and shortest pause, disturbs the coffee puck the least.
Bottom line, the pre-programmed brewing profiles of the Youn are disappointing and waste much of the technical potential of the machine. Here we would very much wish for more generous and adjustable pre-infusion options – such as a profile with ~24 - 32 ml pre-infusion, moderate pressure build-up (e.g., to 8 bar) and subsequent reduced flow. The machine's hardware could handle all of that, but the software (yet) does not allow it.

Espresso quality: good, but not very good
So how do the espresso results of the Ligre Youn stack up in the cup? In our tastings, the machine consistently produced solid to good espressos. The extractions were reproducible and balanced thanks to temperature and volume control (offset-corrected temperature). Flavor-wise, many shots appealed to us – especially when we used the least invasive Mellow Morning profile.
However, there was no espresso that really stood out or fully exploited the aroma potential we know from the beans used. This is where the restrictive brewing profiles limit possibilities. The Youn shows hints of its potential but can't fully realize it in its current programming. Experienced users who like to play with pre-infusion, pressure profiling, and flow rate will likely be frustrated since they can't freely set these parameters. Instead, you have to work with the given (suboptimal) profiles, which prevents top results. In short: the Ligre Youn delivers quite tasty espresso in everyday use – just not one that stands out or extracts the maximum from a specialty roast.
Rating: 9 out of 15
Brewing tips for the Ligre Youn
Because of the sluggish temperature development and slow start, you should aim for longer extractions with all brews. Many coffees brewed best for us with pulls of 32 to 35 seconds. We recommend rather medium roasts, which have a solid base of their own and forgive much. From our selection you could try the Apas or Boton.
Milk frothing function
A highlight of the Youn – and a clear hint at which target audience was also in mind – is the automatic steam wand with integrated frothing system. Ligre advertises ten different milk foam textures at the push of a button, and indeed you can set via the menu how much foam you want (from rather liquid "Flat White" consistency to firm foam) as well as the target temperature of the milk. In Easy Mode, pressing the milk button is then enough, and the machine froths independently to the programmed level. How does it work? The Youn has a temperature sensor and steam function. You place the milk pitcher with cold milk under the wand, press start – and can watch as air is first blown in and then the milk is brought to temperature.
We were initially skeptical but were pleasantly surprised: the milk automatic delivers excellent results. The microfoam is fine-pored and glossy, exactly what you want for latte art.
The consistency can be chosen in advance as mentioned; we mostly used level 5 or 6 (out of 10) for cappuccino and achieved nearly perfect results. Of course, you still have to practice pouring, but the machine takes 90% of the work off your hands with this feature. Especially for beginners or households where not everyone is a barista, that's great comfort. During testing, it turned out that really cold milk is a requirement – in Easy Mode the machine also points this out, using chilled milk and not starting otherwise. If the milk is already hand-warm, the automatic program doesn't work. In Easy Mode, frothing takes about 60 seconds.
We were impressed and can offer praise: "Very, very good milk foam quality – there's really nothing we wish for improvement.
Of course, the Youn also offers the option to froth manually, and that was personally important to us. If you were locked into automation, we would have seen that critically – because even if it works well, advanced users might occasionally want to take things into their own hands.
If you don't press but pull the milk foam button, you froth manually. In manual mode, the machine behaves like a compact dual-boiler: you turn the steam lever on and froth to your liking. The steam power of the 1300-W boiler is good, but not overwhelming. The Youn froths 200 ml of milk in maybe 40 seconds – that's significantly slower than some dual-boilers in the same price range, but still sufficient for home use.
Compared to other machines this size, the Youn ranks in the lower mid-field for manual frothing. We really like the "cool-touch" property of the wand – it doesn't get hot on the outside, so you can touch it safely. Overall, we can say: whether cappuccino or flat white, the Youn delivers the milk performance you expect from a high-end machine – with the bonus that it's almost automatic if you want. It's somewhat slow when frothing - at home we think quality matters more than speed.
Rating: 9 out of 10

Energy consumption and sustainability
In times of rising electricity costs and sustainability consciousness, the power hunger of a portafilter machine is certainly a factor. Ligre claims the Youn is particularly efficient and saves up to 50% energy compared to conventional machines.
We measured: in espresso operation – i.e., when only the thermoblock is active – the Youn actually consumes pleasingly little. An espresso pull including heat-up phase came to roughly 0.052 kWh for us. As a comparison point, we look at 5 double pulls including heat-up: here we come in at 0.088 kWh. Both values were measured with the steam boiler switched off.
That's a very good value, roughly the level of an efficient thermoblock machine. The quick heat-up time naturally plays positively here: since nothing needs to heat through for a long time, energy is saved. However, if you switch on the steam boiler (for milk drinks), consumption rises significantly. With boiler we were still in the green zone in mixed operation, but no longer record-breaking – other (smaller) dual-boilers in our tests achieved similar values.
Pure thermoblock systems or film heaters are even more economical with longer operation. According to our measurements, the Youn in combo mode requires about three times more power than a machine that operates completely without a boiler. Why? A boiler must constantly be held at temperature to deliver steam on demand at any time. Thermoblocks or flow-through heaters only heat as needed and are therefore more efficient on average. Here we see a target conflict: if you want maximum steam power without waiting time, you couldn't avoid a boiler – that costs energy. Modern film heaters certainly manage this and equally quickly.
Ligre made this classic compromise: performance over efficiency, at least for the milk system. To be fair, it must be said: in typical home use, the steam boiler isn't constantly needed, and you can also switch the machine off between uses or put it in eco mode (the Youn has a standby function). Still, the criticism remains that a hybrid system here doesn't quite match the most economical solutions. We would have found it interesting if Ligre had used a second thermoblock or a film heater for steam instead of a classic boiler. That would have further reduced power consumption.
In any case: the Youn is manufactured in Europe under strict environmental regulations regarding materials and manufacturing. Durability was also on the requirements list – every machine reportedly goes through extensive lifetime testing by the manufacturer.
That puts this point somewhat in perspective, because what good is the most efficient machine if it needs replacing after a few years. With the robust Ligre, we certainly have confidence it's built for many years of coffee enjoyment.
Rating: 8 out of 10

Design and craftsmanship
Let's return to the external appearance of the Ligre Youn – because this machine draws eyes to it. As mentioned at the beginning, some visitors to our academy initially didn't even realize it was an espresso machine. The Youn looks futuristic and minimalist: a flat, slightly angled front with no visible brew group housing, a small monochrome display, and otherwise just a slim cylinder (the brew head) and a straight steam arm protruding from the housing. No prominent rotary valves, no nostalgic gauges – "away with the many levers and chrome bling of traditional machines", the design seems to say.
Instead, the Youn appears like a monolith of aluminum, radiating timeless elegance. We immediately liked this look. It's boldly different and yet high-quality.
You can tell that industrial designers were at work here who wanted to make a statement – and they succeeded. The material appearance is also top-notch: the anodized aluminum feels good, nothing wobbles or rattles – except for one small thing, more on that shortly. Overall, we can confirm what design juries have honored: the Youn is a feast for the eyes in any modern kitchen.
Where there is light, however, there is also some shadow. In everyday use, some ergonomic and design flaws became apparent that stood out despite all love for the look. First: the machine has no adjustable feet. Since the front panel of our machine and grinder don't stand at the same angle, they don't form a seamless unit.
That's a shame, because especially when two such design-forward devices stand next to each other, you want them exactly at the same angle. We helped ourselves with shims.
Second: the placement of the grinder – or rather, the required floor space – is impractical. Machine and grinder side by side require about 60 cm width. Though they appear slender due to the low depth, you need a wide counter. In small kitchens, that becomes difficult. And as much as the machine, with its low depth, seems to call out to be placed under hanging cabinets. It is quite high and that means if cabinets hang too low, the water tank can't be removed.
Honestly, we also notice this in some of Ligre's promotional images. That doesn't really look like the water tank could be removed there.
Third: a small manufacturing dampener – the machine shows its strengths at the front and not on the back side. Not really problematic, but we noticed that when tapped, the side and rear walls rattle somewhat and don't match the quality feel of the front.
Design and control-wise, we notice the high temperature of the solid brass portafilter holder. It seems to be not or poorly insulated. We measure more than 70 degrees and find them problematic especially because the machine is otherwise so elegant and beautiful that you want to touch it. With the portafilter holder and brew head, you definitely shouldn't do that.
Otherwise, there's little to fault with the craftsmanship: the portafilter sits firmly (standard E61 bayonet with good resistance), the levers and buttons have a clear click point, and the drip tray is generously sized.
Conclusion and rating of the Ligre Youn
The Ligre Youn is undoubtedly one of the most exciting new espresso machines to hit the market in recent years. It combines technical progress with aesthetic boldness – and the result is a device that is both eye-catching and high-performance coffee tool. In our test, the Youn impressed us with its quick readiness for use, precise volumetric dosing, and clever features like the Guide Mode and automatic milk frothing function. A real highlight is the powerful milk frothing function, both automatic and semi-automatic.
As good as the technical potential of the machine is, we are equally frustrated by the control. The temperature offset with which the machine has been shipped since launch prevents market orientation and has certainly led to many sour espressos at home.
The fixed programmed brewing profiles diminish the result in the cup. Despite high-quality hardware and precise control capabilities, the Youn can't show its full potential as long as pre-infusion and pressure profiles are so restrictively preset and can't be adjusted by the user.
The programmed brewing profiles make no sense brewing-wise for us. After measuring and recording the profiles, we contacted numerous colleagues from the coffee community and asked for support in interpreting them. These included of course particularly users of Decent espresso machines and Unicas. Nobody could make sense of the profiles and reproduced the curves on their machine with satisfactory results.
So we conclude the test very mixed and want to sum it up in one sentence: technically, the Ligre Youn is potentially as good as the design is a statement – in programming and implementation, it frustrates us in many respects.
Can you make good espresso with the Ligre? Of course! Is the milk foam outstanding? Absolutely! But the Ligre doesn't do justice to its own technical potential to be one of the best espresso machines. And that's tragic!

Excursus: Ligre Siji Grind By Weight
Our test of the Ligre Siji is already complete. Since the manufacturer has announced larger updates coming soon, we're still holding off on publication and will test the new Siji version. Some information for anyone considering buying the grinder.
Internally, the Ligre Siji is a Eureka Specialità equipped with sophisticated weighing technology developed by Ligre. When the portafilter is inserted, the grinder first weighs or tares the portafilter and then begins grinding promptly.
It is very accurate regarding grinding results. If you define 16 grams as your target amount, those 16 grams are reliably ground. With some coffees, high static charge develops. Problematic in the current version is that the grinder can barely fill the portafilter with more than 16 grams without losing some coffee when the portafilter is removed. For the coffee to fall cleanly into the portafilter, a dosing ring is necessary with many coffees. The grinder control is intuitive and good.
Many other parameters of the grinder are determined by the Eureka Specialità grinder body.
Transparency notice
We purchased the Ligre Youn and Siji with a dealer discount and received a second Youn on loan to rule out an apparent defect on the second model (leaking water tank on our first Youn) and also to verify our offset measurements on a second machine.
When we encounter results we consider problematic during a machine test, we give manufacturers the opportunity to comment. That also happened with Ligre. However, one novelty was that we explained some of our findings in more detail and engaged in an exchange with the manufacturer. This willingness on our part was certainly helped by the fact that we had good conversations with Ligre representatives at trade shows, but also that the explanatory conversations at the beginning of testing were transparent and the manufacturer openly explained the machine's peculiarities to us. We were also open to providing feedback because we rate Ligre's potential higher than the machine that sits on our test bench today.
However, the subsequent conversations did not lead to us forming a different impression of the machine and its potential; if anything, the opposite. We were promised a change to the temperature setting. We hope to be able to tell you soon from which serial number this will be implemented.
The published video was not influenced by conversations with Ligre as it was recorded beforehand. Based on the insights gained through the exchange, Ligre has begun to change some aspects of its online presentation of the machine, which irritated us.
As a consequence of this exchange process, we will no longer engage with manufacturers in conversation in the future and will not share detailed findings and parts of our test results. We will of course continue to allow space for statements without disclosing details of the results on our part.
Our goal remains to create real added value for the coffee community through transparent and comprehensible tests and to accompany product development through fair, substantiated criticism. We look forward to future machines that show how technology and user needs can be even better aligned.
![]()

















