Home / Coffee knowledge / Melitta EPOS Coffee Machine – Review, Tips, and In-depth Analysis
    Filterkaffeemaschinen
    Melitta EPOS Kaffeemaschine – Test, Tipps und geballte Analyse

    Melitta EPOS Coffee Machine – Review, Tips, and In-depth Analysis

    The new flagship of filter coffee makers from Melitta is called Melitta EPOS. EPOS as in "electronic Pour Over System". Or Epos as in epic? We'll explore this in this intensive test. The Melitta EPOS is a filter coffee maker with an integrated coffee grinder.

    First and foremost – the rotating brew water distribution of the Melitta EPOS has set a milestone in terms of distributing coffee water. No other filter coffee maker distributes brew water better than the Melitta EPOS. This is exactly where Melitta is making an enormous development step, addressing the biggest problem in this coffee maker segment. The machine brews with high precision. The extractions are very consistent and the taste is correspondingly good.

    I take my hat off to that as a filter coffee enthusiast. To truly understand the Melitta EPOS technology in detail, I conducted my most comprehensive coffee maker test to date. 20 hours and over 100 extractions have flowed through the filter.

    Unfortunately, the Melitta EPOS doesn't perform as well everywhere as it does with brew water distribution. That really frustrated me during testing. If Melitta had worked as consistently in the area of the grinder and control as they did with water distribution, the Melitta EPOS would be the best filter coffee maker on the market. Instead, it's a first-class brewer with an average grinder and inadequate control options.

    But read for yourself and watch the first test video if you want to learn more. An even more detailed video will be released next week. Enjoy.

    Brew Water Distribution – The Showpiece

    The Melitta Epos distributes brew water evenly across the entire coffee bed throughout the entire brewing process. This is the most important task when brewing filter coffee and coffee in general. This allows the brew water to dissolve roughly equal amounts from all coffee particles.

    With this, the Melitta Epos achieves something that no other filter coffee maker has done as well before. The vast majority of filter coffee makers drip into the center of the coffee cake. At this point, enormous turbulence occurs and a large proportion of what is soluble is extracted from the surrounding coffee particles. However, it's important to note that not everything that's soluble in coffee also tastes good. If too large a portion is extracted from the coffee grounds, the coffee drink tastes bitter. We call this case over-extraction.

    In the case of the coffee maker that always drips to the same spot, we simultaneously have under-extraction. This occurs at the edges of the coffee filter, where the coffee grounds are not sufficiently washed with water. There's a lack of water flow and turbulence. Too little extraction leads to a sour, sometimes aggressive, and unpleasant taste.

    underover


    When a brewer always drips into the center, onto the middle point, and the water volume is not adjusted, over-extraction occurs at this point. At the same time, the outer area is not extracted sufficiently.

    The result in the cup is unbalanced, bitter and sour to a high degree, which overshadows the positive taste of the coffee. It's almost absurd that the vast majority of old and new filter coffee makers still use such technology.

    At the same time, this is why hand-brewed coffee almost always tastes better. The brewer can then control how they add the water themselves.

    Like Hand-Brewed – EPOS as in "electronic Pour Over System"

    After the brew starts, it takes 5 to 15 seconds before the brew arm begins to rotate and distributes the brew water over the coffee. Three holes dispense the water offset at 1.5cm intervals. The fact that Melitta calls the rotating water distribution "electronic Pour Over System" is quite amusing from the perspective that Melitta Bentz once brewed by hand. "Melitta – brew electronically like Melitta" would have sounded strange though. At the same time, the machine's name contains a reference to the trendy hand-brewing scene that likes to throw around anglicisms. Filter coffee is hip and young. EPOS also sounds like epic, which in many computer games is the highest item category.

    And indeed. The Pour Over System brews almost like by hand and even better. The machine brews consistently and controls the water volume. It also brews alternately with single and triple water pours. And the triple pour is something no hand brewer can pull off.

    The coffee grounds are wetted very evenly. Due to the triple spray, considerable turbulence occurs in the brewer, ensuring that all the coffee grounds are extracted evenly. The hand brewer solves this by stirring the coffee. The triple spray combined with consistent pouring provides equivalent results.

    Brewing – Consistent as Clockwork

    Overall, I did around 100 brews with the Melitta EPOS. What's really impressive is the consistency! The EPOS rotates like clockwork. This is impressively visible in the test video too. To test the brewing unit on its own and not be limited by the built-in grinder, I brewed weighed-out coffee portions of 30 grams of coffee with 500 ml using an external professional grinder. The measured strength of the coffee particles (TDS % = total dissolved solids) is remarkably consistent. In 20 brews, I measured a marginal deviation of 0.02 TDS. I know no professional hand brewer who delivers better results.

    Coffee/Water TDS Water Cycle Drip Cycle Output Volume Extraction
    30g/500g 1.36% 02:24 03:08 425 19.27%
    30g/500g 1.37% 02:21 03:07 425 19.41%
    30g/500g 1.37% 02:20 03:07 422 19.27%
    30g/500g 1.38% 02:22 03:09 422 19.39%
    30g/500g 1.36% 02:21 03:08 422 19.13%

    Conclusion on Water Distribution

    The water distribution on the coffee grounds is the best I've tested in a filter coffee maker. That's really enjoyable and the brews are extremely consistent.

    outer hole

    There's only one deduction for me here. While the machine's description states that it brews with individual brew profiles – this is only partially true. The EPOS delivers precisely, rotates consistently and also controls all three brew water outlets relatively evenly – in all brew profiles. While it does brew the smallest coffee volume of 2 cups or 250 ml water with a slightly shorter retention of 90 milliliters and 45 seconds, that's long and unfortunately can't be programmed differently. All other brewing volumes use a water volume of 120 milliliters and a time of 50 seconds for retention.

    The outermost water outlet is also activated very early. This means that with smaller coffee volumes (2 cups), the outermost brew water outlet doesn't wet the coffee grounds at the beginning of brewing, but rather the filter paper. But the goal is to extract coffee, not paper, and there's a risk that the water flows past the coffee.

    water paper

    Here you can see, albeit blurrily, that the outer water stream is aimed at the paper filter, not the coffee.

    Nevertheless, the water distribution convinces and deserves 9 out of 10 possible points!

    Flow Rate

    Another important criterion for a good brewer is the flow rate. If water is added too quickly, it pools on the coffee bed and there's a lack of turbulence. In this case, extraction is also too low, meaning not enough is extracted from the coffee bean.

    If coffee is added too slowly and repeatedly flushed in batches, impact turbulence occurs over a very long period, leading to very high extraction of coffee particles. The coffee is then in contact with water for far too long overall.

    The Melitta EPOS finds a good middle ground. During retention, it adds somewhat too much water, but thereby ensures that all the coffee is really wetted. Subsequently, it brews very consistently with a water addition of approximately 100 milliliters per 20 seconds. That's a good value. The crown jewel would be if this water volume could also be controlled, so that especially the retention phase runs differently.

    Why a Retention Phase or So-Called Blooming?

    First of all, it's very positive that the Melitta EPOS has a retention function. Instead of continuously pouring from the start, this is activated by default when the pre-infusion button lights up. A retention phase is especially useful when coffee is fresh. Good coffee is always fresh and with a built-in grinder, it's also freshly ground.

    In this case, the coffee grounds still have a decent amount of CO2 bound from the roasting. Through a retention phase with high temperature, the CO2 can escape and is subsequently not in the coffee. This makes sense because CO2 gives the coffee drink an aftertaste of carbonation. Additionally, the escaping CO2 stirs the coffee bed. This leads to uneven extraction and should be avoided. This is why a retention phase is especially useful with fresh and darker roasted coffees with more CO2. Blooming is what the retention phase is called because the coffee literally rises like a blooming flower.

    A retention phase is present, a plus compared to many conventional filter coffee makers. The flow rate is good. Since both unfortunately can't be controlled, there's a 2-point deduction, but still a very good conclusion with 8 out of 10 for flow rate.

    Brew Temperature of the Melitta EPOS

    The set brew temperature is at the upper limit. At the water outlet, I measured relatively consistent temperatures of 98 degrees. In the bed, the brew temperature was consistently 94 – 95 degrees. These high temperatures are only a bigger problem if a coffee is darker roasted.

    With darker roasted coffees, there's already plenty of bitterness present. The high temperatures reinforce this impression further. With high-quality, rather lighter roasts, the high temperatures are not a problem.

    If a temperature adjustment option were available, the brewer could make certain adjustments themselves and adapt the temperature to the coffees used. Unfortunately, this is not the case. Hardly any filter coffee maker has this capability. But the Melitta EPOS, with its price of around 300 €, also ventures into the highest price segment. The desire for such a function doesn't seem far-fetched. And if you want to develop a brewer for all coffees and customer groups, temperature adjustment of brewing is almost necessary.

    Therefore, the Melitta EPOS concludes rather averagely here. 6 out of 10 points is my rating for temperature.

    Does the Coffee Taste Good?

    Ultimately, a coffee maker should primarily make good coffee. The Melitta EPOS achieves this in part with flying colors. Especially with high-quality coffees directly from the roaster, ground to the desired grind size not with the built-in grinder but with an external grinder, the results were excellent. I've had some of the best coffees I've ever had with a filter coffee maker.

    The machine shows its strengths at higher brew volumes. Especially at 750 ml, the machine performs brilliantly. In this case, coffee amounts of around 46 grams should be used. With this high coffee amount, the outer opening of the brew arm only briefly wets the paper. The machine manages with its continuous rotation to create pronounced turbulence. It does so very precisely. That's a joy!

    It performs less well with smaller coffee amounts. I especially advise against 250 ml/2 cups. It's better to brew by hand instead. I also can't recommend using dark coffee roasts. The bitterness in the cup at high brew temperatures was unpleasant. Or to put it differently: the machine couldn't show its strengths here. I provide some filter coffee recommendations from roasters in Germany, Switzerland and Austria in my article about coffee selection.

    Overall, the filter coffee maker makes good coffee and 8 out of 10 points go to the Melitta EPOS account. I can't avoid the deductions, as the control options are too limited to unlock the machine's potential in terms of temperature and with smaller water volumes.

    Build Quality and Appearance

    The wide shape, the filter holder on the U-shaped arch, that makes an impression. The Melitta EPOS breaks away from the typical tall and narrow shape of filter coffee makers and looks more like a fully automatic coffee maker in appearance. The EPOS is available in silver-black and gold-black. It's meant to look elegant.

    Unfortunately, the material quality doesn't match the appearance. As soon as the machine is in front of you, it becomes clear: it's completely made of plastic. And that doesn't really look high-quality. The plastic units give way if you press them lightly. The machine doesn't feel really stable. Plastic can be used, but here expectations and reality collide. For the price, the marketing online, coffee bags that no longer come in bulk packages but in elegant envelopes – I wish the machine itself reflected this more strongly.

    Added to this are larger construction defects and problematic controls – regardless of the fact that there's not much you can control.

    cracks

    Water seeps in here. How are you supposed to clean it?

    Where brewing happens, water flows and drips. Both the grinder and the brewer have cracks in the base area that allow water to seep in from above. A plumber working like this in the wet area of a bathroom would no longer get any orders. I found no way to dry out the moisture again.

    The buttons provide no haptic feedback, but instead light up when activated. They trigger very easily, which has caused me to accidentally activate the grind button several times and the grinder eagerly ground away.

    The plastic lid of the beautiful glass carafe has fallen into the opening several times and I had to fish it out of the pot. If it sits on the carafe, that doesn't happen, but when placing it on, the fall can happen quickly. That certainly could have been prevented with a slightly different shape.

    The water tank is removable and can be filled directly at the tap. The markings are very precise and allow for accurate filling.

    Overall, the picture remains that the Melitta EPOS doesn't match its first-class brewing unit in terms of material quality. In addition to the subjective impression, structural difficulties (cracks) carry weight. The limited controls, which we'll discuss further in the grinder section, also fall short. 5 out of 10 points is what I have to rate here, also in light of the very high RRP price of 299 €.

    Price-to-Performance Ratio of the Melitta EPOS

    Of course, 299 euros is a lot of money. On the other hand, you do get a coffee maker and a coffee grinder. As a consumer, the decision is taken away from me whether I even want that.

    Personally, I would buy the Melitta EPOS without the grinder for 180 euros and would find the price appropriate. For control options, temperature control and profile storage, I would have also put 300 euros on the table – without the grinder.

    Nevertheless, it must be said that you get a lot of performance for your money here. And if you follow our brewing recipes, you'll also brew very good coffee with the Melitta EPOS.

    Our impression: 6 out of 10 points.

    Bonus Points for Special Features?

    If I particularly like things about a filter coffee maker that haven't found a place in the previous text, they come to light here. This includes the Melitta EPOS, where the heating plate can be turned off by pressing and holding the "Brew" button for a long time. Coffee kept warm doesn't taste good and Melitta also writes this in the user manual. The fact that it also points this out and performs an automatic shutdown after 40 minutes is positive.

    There is also a "manual extraction control." If you want to brew yourself, you're of course better served with a hand filter and a pour-over pot. But the fact that the function is there is still nice. With this, you can manually adjust the rotation direction of the brew arm, but not the activation of the holes. It's also not possible to save the manual brew.

    An option with a thermal carafe and no heating plate at all was not available at the time of purchase. I would have rated that positively because a thermal carafe maintains the coffee taste better over a period of 45 minutes than a heating plate.

    For the option of turning off the heating plate and the manual extraction control, the Melitta receives two bonus points.

    Conclusion on the Melitta EPOS Filter Coffee Maker Rating

    The Melitta EPOS plays on two fields. It is both a filter coffee maker and a coffee grinder. I decided to rate them separately and will apply this principle to further tests of filter coffee makers with grinders. This allows for better assessment of the machine's performance in both areas.

    Test EPOS

    Integrated Coffee Grinder of the Melitta EPOS

    In its own right, the Melitta EPOS grinder delivers decent performance. A good grinder is characterized by consistent particle size (particle distribution). If you select, for example, medium grind setting, as many coffee particles as possible should correspond to this grind size or desired particle size. Particles that are smaller are extracted much more intensively (over-extraction). Particles that are larger are extracted less intensively (under-extraction). We only performed quality control using micron sieves by hand and obtained satisfactory results. We sent one batch of grounds and are still awaiting the results.

    The grinder offers 3½ control options overall.

    grind

    1. Grinding Amount by Selecting Cups

    When choosing 4 cups, for example, an amount of slightly more than 30 grams is ground. The amount depends on the nature (density, moisture, roast, age) of the ground coffee. This is why almost always at least a slight correction of the grinding amount is necessary.

    2. "Strength" Beans

    By choosing one, two or three beans, the grinding amount can be slightly changed. By increasing to two or three beans, more coffee grounds are used than with "one bean".

    3. Grind Size Adjustment

    The grind size can be adjusted in three levels. Fine, medium and coarse. No further adjustment options can be found in the user manual.

    Additionally, the grinding amount can be increased or decreased by 10% overall. The control is so cumbersome that probably even the proofreaders of the user manual didn't catch an error. Under section 3.5 in the grinding volume fine adjustment area, it says that when LED 2 lights up, the grinding volume is reduced. The correct answer would be LED 1. I emailed Melitta about this and it was confirmed accordingly.

    Why This Can Be Quite Problematic

    If your coffee tastes good, then all is well! If your grinder produces the right amount at the right grind size for the coffee you're using, you can skip this chapter. Unfortunately, that would be a stroke of luck and already the next day, with a different coffee, you might face the following challenge.

    I brewed with the setting 4 cups, bean strength 2 and grind size medium. To check the results, I weighed the coffee amount after grinding each time and also measured the water volume exactly.

    Cup Bean GS Coffee Amount TDS Water Cycle Drip Cycle Output Volume Extraction Brew Ratio
    4 2 medium 33 1.46% 02:25 03:24 408.1 18.06% 15.15
    4 2 medium 34.2 1.55% 02:12 03:20 404.2 18.32% 14.62
    4 2 medium 33 1.52% 02:22 03:30 409.3 18.85% 15.15
    4 2 medium 34.8 1.56% 02:12 03:24 402.3 18.03% 14.37
    4 2 medium 34.4 1.58% 02:11 03:17 406.1 18.65% 14.53
    4 2 medium 34.4 1.54% 02:10 03:10 405 18.13% 14.53
    4 2 medium 31.7 1.53% 02:25 03:35 408.8 19.73% 15.77
    4 2 medium 33 1.58% 02:18 03:30 407 19.49% 15.15
    4 2 medium 32.2 1.54% 02:18 03:28 406.1 19.42% 15.53
    4 2 medium 31.7 1.52% 02:19 03:32 408.1 19.57% 15.77

    The brewer showed remarkable consistency. Both in taste and in measurement with the refractometer, the coffee was quite strong. In the measurement, this can be explained by the high TDS. TDS stands for "total dissolved solids" and represents the concentration of dissolved coffee particles. Typically, filter coffee has a strength of approximately 1.2 to 1.5%. Depending on the coffee used, it tastes stronger or weaker. In our case, the coffee was very strong and the acidity was slightly unpleasant.

    To reduce strength, we can do two things. Either adjust the grind size coarser or use less coffee. You should never do both at once, otherwise the results won't be easy to reproduce.

    So I used less coffee grounds. This was also supported by the fact that the coffee grounds used above were extracted at the lower limit (18.83% average). Extraction is what we extract from the bean. For filter, a value between 18 – 22% is good. At the lower end and below 18%, the acidity of the coffee is emphasized. At the upper end and above 22%, the coffee tastes more bitter.

    Cup Bean GS Coffee Amount TDS Water Cycle Drip Cycle Output Volume Extraction Ratio
    4 1 medium 30 1.47% 02:23 03:30 425 20.83% 16.67
    4 1 medium 30 1.42% 02:22 03:22 426 20.16% 16.67
    4 1 medium 30 1.42% 02:30 03:30 428.7 20.29% 16.67
    4 1 medium 30.5 1.44% 02:22 03:25 426.4 20.13% 16.39
    4 1 medium 30 1.45% 02:24 03:28 429.5 20.76% 16.67

    The subsequent grinds were impressively consistent. The grinder ground 30 grams accurately several times in succession. That's remarkable because hardly any professional grinder does that precisely.

    The coffee tasted significantly better. It was balanced and sweet and acidity and bitterness were well balanced against each other. I wanted to continue fine-tuning, however, to also test the limits of the grinder.

    Since the grinding amount was perfect, the option of coarser grinding remained. So I adjusted the grinder to coarse.

    Cup Bean GS Coffee Amount TDS Water Cycle Drip Cycle Output Volume Extraction Ratio
    4 1 coarse 32.8 1.42% 02:25 03:30 414 17.92% 15.24
    4 1 coarse 33.4 1.43% 02:02 03:20 400 17.13% 14.97
    4 1 coarse 32.8 1.42% 02:21 03:18 411.7 17.82% 15.24
    4 1 coarse 34.3 1.43% 02:24 03:19 422.4 17.61% 14.58
    4 1 coarse 34.1 1.51% 02:26 03:21 407.8 18.06% 14.66

    As a result, the grinding amount also increased again. Instead of 30 grams, the grinder averaged 33.48 grams. That no longer matches my desired coffee amount of approximately 60 grams per liter. Accordingly, the brew water used could no longer extract enough from the particles. It was too little for the coffee amount and also too coarse. The coffee tastes sour.

    The coffee amount could no longer be changed using the "strength" buttons. By reprogramming the strength buttons with a 10% reduction, the approximately 30 grams were achieved again. However, the grind size was still not coarse enough.

    And now I had reached the end of the grinder's capabilities. A coarser grind size cannot be set. 3 levels for grind size setting are very, very little. Modern grinders come with 30 levels or are even infinitely adjustable.

    Forgot to Co-Develop the Grinder

    The grinder's adjustment options remind strongly of the Melitta Aroma Fresh – also a filter coffee maker with integrated grinder.

    There too, the adjustment options are too limited. But there's another big and important difference to the Melitta EPOS.

    The Melitta EPOS brews with its brew arm with much more turbulence. So through swirling, much more is extracted. For this reason, the coarser area of the grinder is much more in demand than would be the case in the area of brewing with a "classical filter coffee maker".

    And this is where things get frustrating. The grinder is good in terms of consistency. But it can't keep up with its further developed neighbor, the brewing unit. It doesn't deliver the right grind size to work flexibly with the brewer. The control options are limited. 10% more or less grinding meal is not a sufficient amount to set the desired grinding amount.

    A good brew is not just about "Pour Over" but about the interaction of an exact grind size, coffee amount and pouring.

    melitta epos measurements

    This is how I measured the flow rate. Using the Black Mirror scale and its accompanying app.

    Final Conclusion on the Melitta EPOS

    It's really difficult to give a differentiated conclusion on the Melitta EPOS. That's why this article has become so long. When evaluating a football team, the team's overall performance counts in the end. Even if someone up front scores goals – if the defense doesn't keep up, that doesn't help much.

    It's a bit like that with the Melitta EPOS for me. The consistent further development of the brew arm is really very well done. I've never had so much fun with the consistency and quality of water distribution. Bravo!

    Unfortunately, the grinder can't match this performance. It's a solid grinder in many respects. But it's not the right counterpart to support the brewer's performance. Nevertheless, it must be said: a grinder is a hundred times better than no grinder, because freshly ground coffee is the prerequisite for good coffee. I'm grateful to Melitta for this signal to the market.

    The machine's adjustment options are limited. This causes the Melitta EPOS to miss further opportunities to become the best filter coffee maker on the market. That's tragic because it was absolutely within reach.

    Who Is This Filter Coffee Maker For?

    With its compact size and good brewer, the filter coffee maker is a good choice for anyone who enjoys good filter coffee. If you already have an external grinder standing around anyway, you can use it to compensate for the machine's weaknesses.

    I rather recommend using medium to light filter roasts and high-quality beans. This is the appropriate match for the high brew temperature.

    I also find the machine interesting for coffee schools and roasteries for courses and better understanding of turbulence. The machine's consistency is remarkable and you can learn a lot as a hand brewer too.

    Wish List for Melitta for the EPOS 2.0

    I would like to see:

    • PID temperature control
    • Display with grinding volume readout
    • Infinitely adjustable grinder
    • Thermal carafe and no heating plate
    • (Less plastic)

    What do you think?

      Which machine should we test next?

      Espresso machine or grinder: Tell us what should be next on our test bench. We read every request.

      We only use your email to follow up on your request. You'll only receive the newsletter if you check the box and confirm. Privacy Policy