We have a new coffee packaging. We did extensive research for this and developed the bag ourselves. Our current solution keeps the coffee fresh even longer and produces fewer emissions. Packaging is a continuous optimization process, and that's why we keep evolving here too. We describe what we've learned, which packaging is sustainable, and what you should pay attention to when buying coffee.
In an ideal world, we wouldn't need packaging. In our coffee universe, however, we ship more coffee than we physically sell in our two cafes in Basel. For our purposes, packaging is a must to be able to ship coffee at all, to maintain quality, and to guarantee food safety.
At the same time, packaging serves as a carrier of information: a brand design imprints itself in memory, and through labels we can describe our coffees, tell their stories, and build desire for the experience.
Our "New Ones" - 250g and 1000g made of monolithic material: 60% renewable raw materials via mass balance, 30% recycled plastic via mass balance, and 10% new plastic.
When we look at packaging in the coffee world today, we see very different approaches in the specialty coffee industry about what coffee packaging can and should do.
We see pragmatic approaches to packaging that simply do exactly what they should - make coffee transportable. We see approaches that are more about pure design: especially when a lot of material is used. And then we see increasingly more ideas about how packaging can be made at least recyclable, but even better circular.
In the best of all worlds, there would be packaging that addresses all these criteria:
airtight, pleasant to hold, circular, and stylish.
With this idea, we started a long learning journey. It's not over yet, but we've developed a clear picture and a clear position on what properties a good coffee package must have, and what doesn't make sense for us.
We focus on continuous improvement in everything we do. For us, sustainability is at the center of packaging too.
How high are the environmental emissions from coffee packaging?
In the overall calculation of our emissions from 1kg roasted coffee to the moment when a coffee bag leaves our roastery, the packaging itself accounts for only about three percent of total emissions.
In our case: packaging accounts for "only" 3% of coffee emissions
In the first chart, we look at the emissions we cause at the Basel roastery. In 2023, all packaging used accounted for 16.7% of all roastery emissions.
Emissions from the Kaffeemacher roastery in Basel, 2023

The figures refer to harvest 22/23 at Santa Rita, Nicaragua.
We know exactly where the biggest levers are to reduce emissions in a coffee chain: in cultivation, not in coffee packaging. But: where we are, we can drive rapid change with what we know. And that's why we must continually improve packaging too.
One aspect we don't want to overlook when developing sustainable packaging is the look and feel. The emotions we experience when we see, hold, and feel a certain package influence our purchasing decisions.
And that's sometimes rather absurd:
- Paper-like packaging can suggest to us that roasted coffee is sustainable, even when there's no connection. The coffee could have been produced in a completely unsustainable way.
- The opposite is also possible: highly sustainably produced coffees are sold in aluminum packaging, which by far is the most environmentally harmful (see chart below).
So we sought packaging whose appearance matches its contents. Sustainable coffee must go in sustainable packaging.

Aluminum performs worst in terms of emissions but has the best freshness retention capacity. Design: Tobias Milz, dataset from ecoinvent
New packaging - a process, not a state
In November 2022, we wrote a blog about our new packaging saying it was now more sustainable. Back then, we switched from the widespread paper-plastic composite to mono-plastic, with the idea that mono-plastic bags could be recycled and we'd have a better carbon footprint.

Our packaging upgrade from November 2022
Around the same time, we came across an article from the DIW and disillusionment set in. The thermal treatment of plastics produces about 2.7 kg CO2e, which roughly doubles emissions over the entire lifetime. Tobi put it bluntly then:
"Well, that was completely wrong."
And why exactly?
Because we consumed a lot of new material, so-called virgin material, based on fossil raw materials. The old and new packaging weighed the same, just under 13 grams. But the new packaging, which was recyclable because it was made of mono-plastic, consumed twice as much virgin material as the old packaging.
Learning 1:
The amount of material used is crucial to whether emissions are low. We're seeing more and more recyclable coffee packaging. That's actually progress - designing packaging so it can theoretically be recycled for another purpose. But: if only a small percentage worldwide (9%) gets recycled and the rest is burned or ends up in the environment, is this approach actually effective?
Anecdote:
We had lunch with an innovation manager at an energy company.
"Don't make more plastic"
was his input. His company burns household waste to produce district heat, steam, and electricity. However, today's household waste is "too clean" because people separate their plastic and packaging waste.
Household waste now has too little combustible mass, so plastic and packaging waste has to be added back for burning to actually work. As an alternative to plastic waste, the waste pile is also sprayed with an oil derivative.
"But not recycling isn't a solution either"
we heard from various quarters that otherwise vehemently disagreed. So there's something like a consensus in science and industry that recycling must happen, but the entire system is still far too underdeveloped, and plastic consumption keeps rising.
Learning 2:
Recycling is not yet a functioning system. And yet we have to do it. Legal requirements are getting stricter, recycling is becoming more widespread, and pressure for change is growing.
And yet we asked ourselves: does recycling work for us if we consume even more plastic in the process? Or should we work with packaging that doesn't need to be recycled in the first place?
We set out to find answers and conducted more than three dozen conversations with researchers, developers, manufacturers, recyclers, certifiers, other roasteries, and innovation people. Our project was called internally: "the best packaging of all."
But we learned: the best packaging doesn't exist. It's always a snapshot and always needs to be re-examined.
Early on, we had an exchange with a startup that can produce films from tofu production byproducts. That all sounded very good, but scaling from lab to larger quantities takes years. We're confident that in a few years new materials for films will be in use and available to the broader industry too.
Learning 3:
We decide on a form and the bag's properties, but remain flexible about which material we use. Huge progress is happening right now.
Over more than eighteen months, we contacted various material suppliers and had exchanges with them.
While we were on the lookout for revolutionary materials, we also questioned our own requirements and processes.
- Why do all bags have the same shape today?
- What sizes do we have? Do we need them?
- What are the processes for packing, sealing, and shipping?
- Are the existing dimensions right for us?
- What does each area want?
Through a community survey on Instagram, we discovered that our coffees are typically consumed within eight weeks. Every coffee package needs a best-by date by law. We provide one too, but at the same time recommend orienting to the roast date and consuming the coffee within a few weeks and at most two months.
Since we don't exhaust the best-by date the way large-scale production for supermarkets often does - where coffee sits on the shelf for up to 18 months - we can reconsider the barrier aspect. We don't need an extra-long shelf life. Our bag barrier should keep coffee top-fresh for about three months; that would be enough. This saves on material used - as much as necessary, as little as possible.
The following additional research questions came up:
How fast does coffee age in a bag?
We checked three different coffees from the same date over eight weeks for oxygen content.
How airtight is our current packaging?
When checking oxygen content, we found that not all packages were equally airtight, and we sometimes found up to 17% oxygen (of a possible 21%) in the package.
How do other packages on the market perform?
We analyzed coffee packaging from more than a dozen coffee roasteries, and more than two-thirds had the same problem: the package wasn't airtight.
How does coffee age in "airtight" packaging?
Much more slowly: the coffee showed more character, more aromas, and overall seemed rounder.
We learned through observations, tests, and many tastings. With insights from our pretests, we sought conversations with manufacturers. With each conversation we learned more and quickly realized that most manufacturers need to rethink.
Those who already work with new materials, however, still have capacity bottlenecks or lack food-safety certifications, which makes scaling difficult for them.
Data and facts about our new bag
Our new bag is made of monolithic material and therefore recyclable. The old bag was not. In composition, our new bag consists of
- 60% ISCC-certified renewable raw materials via mass balance method: tall oil, which is a byproduct of paper processing
- 30% ISCC-certified post-consumer recycled plastic via mass balance method: recycled plastic
- 10% virgin material, i.e., new plastic
Under the mass balance method, we pay for more sustainable materials. These are mathematically present in the bag, physically if at all only marginally. So our packaging could be made of 100% new plastic.
Green electricity and biogas work on the same principle: you pay for alternative materials that the manufacturer then purchases. You buy materials that are mathematically renewable, but from the outlet or tap comes a mixed product.
In the following charts, we therefore work from both a mathematical best-case scenario and a real-case scenario.
Best Case Scenario:
shows what emissions our bag would theoretically have if the 60/30/10 mix were exactly in the bag. It shows the purely mathematical ideal value.
Real Case Scenario:
shows what emissions we actually have if 0% of the more sustainable materials are present in a bag.
The real-case scenario still performs better than the old bag because we use roughly four grams less material.
The ecological footprint of our new packaging
New bag, theoretical best-case scenario: material, production, disposal without recycling
If our bag is not recovered, we have total emissions of 92g CO2e per 250g bag.
New bag, theoretical best-case scenario: material, production, disposal with 35% recycling
Plastics (PE and PP) from which coffee packaging is typically made involve downcycling. The global rate is 9%; in Germany, about 35% becomes usable granulate.
Old bag: material, disposal
Our previous bag, which switches rolling to the new bag in April and May 2025, emits more. We're improving by nearly 25%.
New bag: detailed calculation in best-case scenario
Reality check - what really hurts and where there's joy
The longer we dealt with the topic, the more questions came up. At times we felt like researchers or investigative journalists - but really we were just looking for packaging for our coffee beans.
The packaging issue is complex and too often too intertwined with technological backwardness and lax legal trade regulations.
Minimal improvements were presented to us as "groundbreaking innovations," and what some called a "smart approach" we probably would've classified under common sense. The packaging issue is both emotional and pragmatic at the same time.
You can quickly be bothered by bio-cucumbers wrapped in plastic, but individual coffee beans you can't transport. We need to sharpen our perspective on where packaging makes sense and what properties it really or doesn't need.
In these learnings there were a few things that hurt, but also things that gave us confidence.
What hurts
Recyclable means no more than that it can be recycled. Which works better or worse depending on the material. About 35% of waste collected in yellow bags becomes usable raw material again.
The rest is burned, exported, or ends up in the environment.
Why is recycled material more expensive than virgin material?
- The processes aren't optimized the way virgin material processes are.
- Demand determines price. Demand is high and there isn't much available.
- When there's too little plastic in the waste, oil or plastic waste is bought for burning.
- Material composites can't be recycled. This means they're burned. Which doubles CO2e emissions.
What raises questions
- Not all packaging materials from yellow bags get food-safety approval
- The same goes for (currently) "ocean plastic" → "wild plastic" for other areas
- Valves aren't made 100% from PP or PE but have a small PET film integrated and therefore aren't 100% recyclable
- Worse than packaging waste is food waste or coffee waste
What gives us confidence
- New materials, young companies approaching the big industry players - things are happening
- The EU directive 94/62/EG on packaging and packaging waste "PPWR" is coming and demands the following points, which are especially relevant for coffee packaging:
- Components of recycling packages must be separable and recyclable as individual components
- Material reduction: the weight and volume of packaging should be limited to the necessary minimum.
- Critical for shipping: empty space in packages filled with materials like bubble wrap or foam cannot exceed 50% of total volume.
Checklist for good packaging:
- How long must my product stay fresh?
- How little packaging can I use?
- Packaging size vs. packaging contents
- How do I inform consumers to dispose of the packaging correctly?
- What do we stand for and how does the packaging align with that?
What brings joy: our new packaging partner
Our new partner for coffee packaging is the company O.Kleiner based in Wohlen, Switzerland. We sought a partner who could handle both development and production. Through various conversations we got closer to our goals and together developed new coffee packaging.
Andreas Platz from O. Kleiner (left) and Philipp Schallberger, Kaffeemacher GmbH (right)
















