Water filter pads have one purpose: they are supposed to filter hard water. The risk of limescale buildup in the espresso or Kaffeemacher is to be reduced and the water is also to be treated for better taste. We tested four water filter pads and the conclusion is sobering: all four fail to achieve both objectives when used according to retailer instructions, or achieve them only inadequately.
We tested the water filter pad from ECM, Rocket O.SCA.R 90, BRITA Aqua Gusto 250, and BWT Bestsave S.
Good water for coffee preparation
In many places, tap water at home is too hard to prepare sensorially good coffee. Equally problematic is that even moderately hard water causes limescale buildup. We explained what good water for coffee preparation is in a detailed article and video. Here are the key data again:
Perfect water for filter coffee:
Total hardness: 2 – 3 °dH
Alkalinity: 1 – 2 °dH
Perfect water for espresso:
Total hardness: 3 – 6 °dH
Alkalinity: 2 – 4 °dH
How to measure these values at home, what they mean, and how to change them is also explained in the linked article.
We were often asked whether water can also be treated with water filter pads or water filter cushions.
The use of water filter pads
Water filter pads are rinsed according to manufacturer instructions and then placed in the water tank of the espresso machine or fully automatic coffee maker. There, the water filter pads soften or decarbonize the water over time.
Different manufacturers provide different specifications.
ECM, for example, recommends a soaking time of 15 hours for a water hardness of 15. BWT recommends use overnight (8 – 10 hours according to the application brochure). None of the four manufacturers account for the initial water hardness. It is only mentioned for the pad's lifespan (maximum number of liters that can be filtered over time).
In any case, the pads need time to develop their filtering effect. This is where we stumble for the first time. Because when do we typically refill water? When the espresso machine complains about low water levels or the fully automatic coffee maker beeps annoyingly.
So we pour in water and then brew coffee. No one waits overnight until the next brew or even 3 – 4 days, which our measurements suggest.

How effective are water filter pads?
We placed one filter pad from each manufacturer into a water tank, which we filled with 2 liters of water. After 3 hours, 5 hours, 20 hours, and 100 hours, we took measurements of total hardness, alkalinity, and conductivity.
The total hardness developed as follows.

Total hardness development water filter pad
After 20 hours, all four pads have still not reached the target range desired for espresso, or with an initial hardness of 16 °dH are still far from it. After 100 hours, all water filter pads have sufficiently reduced total hardness, but not alkalinity.

While the water filter pads from BWT and BRITA have also sufficiently reduced alkalinity after 100 hours, this value remains constantly too high for the water filter pad from ECM and Rocket. These two cushions do soften the water, but do not replace bicarbonate to the same extent.
The water is thus protected against limescale formation, but remains sensorially problematic. High alkalinity sensorially leads to a strong weakening of any acidity in the coffee. However, this is necessary for a coffee to be balanced and not taste flat.
Both manufacturers do not communicate this on their packaging.
NOTE: As long as the water filter pad is in contact with the water, the water is in the process and continues to be decarbonized or softened. An accurate determination of water hardness is only possible if you let fresh water come into contact with the pad for a specific time. As soon as you add more water, as usually happens in the water tank, the values become inaccurate again.
Michel Aeschbacher
Water filter pads as a con
The slow filtering effect of the pads requires targeted use if they are to make any sense at all. As described by manufacturers in the instructions, they are not effective and endanger your espresso machine and also prevent your coffee from tasting good.
The water filters from Rocket and ECM are not suitable for brewing good coffee from a sensorial perspective. While they protect your machine if left in water for long periods, they do not reduce alkalinity.
The water filter pads from BRITA and BWT are theoretically usable, but must be used differently than described by the manufacturers. They work best in a separate water jug, which you place in the refrigerator with a water filter pad, and leave in contact for as long as appropriate depending on your initial hardness. We have described here how you can determine your initial hardness.
Plug filters and water filter cartridges, which are inserted directly into the water canister, work better. Due to the flow suction, the filtering performance is significantly better. We have written a test article about this.
---
Backup info
Alkalinity and total hardness were measured using titration drop tests from BWT. 2 liters of water were used in each case and kept at room temperature in the water tank with water filter pad. Conductivity was also measured. The initial total hardness of our water is: 16 °dH total hardness, 13 °dH alkalinity, 520 conductivity
Development of total hardness, water sample taken from the bottom.
| °dH GH | 0 hrs. | 3 hrs. | 5 hrs. | 20 hrs. | 100 hrs. |
| Rocket | 16 | 16 | 13 | 9 | 3 |
| BWT | 16 | 14 | 13 | 11 | 6 |
| Brita 250 | 16 | 15 | 14 | 10 | 4 |
| ECM | 16 | 14 | 13 | 10 | 3 |
Development of alkalinity, water sample taken from the bottom.
| °dH Alkalinity | 0 hrs. | 3 hrs. | 5 hrs. | 20 hrs. | 100 hrs. |
| Rocket | 13 | 12 | 12 | 11 | 10 |
| BWT | 13 | 11 | 11 | 8 | 3 |
| Brita 250 | 13 | 12 | 10 | 7 | 2 |
| ECM | 13 | 11 | 10 | 11 | 11 |


Conductivity development.
| Conductivity | 0 hrs. | 3 hrs. | 5 hrs. | 20 hrs. | 100 hrs. |
| Rocket | 520 | 540 | 540 | 504 | 520 |
| BWT | 520 | 510 | 490 | 420 | 240 |
| Brita 250 | 520 | 520 | 490 | 400 | 220 |
| ECM | 520 | 540 | 550 | 570 | 570 |

















