Home / Coffee knowledge / Defects in coffee. Where do they come from, what do they taste like?
    Defekte im Kaffee

    Defects in coffee. Where do they come from, what do they taste like?

    Not every coffee bean looks the same. That's normal, because coffee is a natural product. We see different sizes and shapes, and sometimes differences in colors too. But: There are more drastic deviations that can have a negative impact on roasting, preparation, and taste. Then we're talking about defects.

    On one hand, we distinguish between defects that can occur on the farm or during further processing and are thus present in the green coffee, and on the other hand between errors that occur during roasting and can diminish the sensory quality of the coffee.

    Some may classify roasting defects as style, but essentially it comes down to whether the bean's full potential is even being realized.

    Defects are also differentiated by their impact on sensory perception. Sometimes it's enough that a coffee bean with the phenol defect ends up in the ground coffee. That single bean can then overshadow the entire taste of a cup of coffee and make it unpalatable. Defects that have such a strong effect on sensory perception are assigned to the first category of defects.

    Coffee Fungi

    Fungal damage. These beans are sorted out before export

    Defects in the second category include beans that individually have no direct impact on a single cup of coffee. Often they are physically compromised beans such as shells or ears, where roasting has a stronger influence and the roasting notes dominate.

    What doesn't count as defects are beans that aren't optically perfect but otherwise show no other irregularities. Or as a colleague once said:

    "Ugly is not a defect."

    I judged at the roasting world championships for several years. One task of the competition is sorting green coffee and classifying defects, which are usually manually mixed into a sample. Many participants sorted the green coffees so precisely – or rather overly precisely – that many green coffees looked optically perfect afterward, but the sorted-out beans had no defect at all; they simply didn't meet the standard.

    Sorting at the Dry Mill

    Sorting green coffees so they are defect-free and largely uniform is the task of the dry mill – the place where coffee is made export-ready. Merchants and roasteries can then choose from various qualities: Roasteries where taste is paramount typically buy coffee without category one defects. Brands that primarily focus on low prices buy cheaper coffee – and thus coffee with defects.

    Hier wird Kaffee im Parchment auf der Farm von Hand sortiert

    Here coffee in parchment is hand-sorted on the farm

    Some of these defects can also be recognized in roasted coffee. So let's look at the defects in the first and second categories and discuss how much they influence taste.

    Coffee Defects and Their Impact on Taste

    In the following, we distinguish where defects can occur and how much they can influence taste. Since some defects are recognizable in both green and roasted coffee, you can verify this at home and examine a bag of coffee for defects.

    Phenol

    You can identify phenol by a sharp, medicinal smell that often reminds you of leather, bandaging material, or rubber. It arises mainly from uncontrolled fermentation or the entry of unwanted microorganisms during processing. Traditionally, numerous roasteries in the Balkans and Eastern Europe use coffee beans with low to sometimes strong phenol content.

    In many classic "Turkish coffees", phenol is part of the flavor profile. So what is professionally classified as a defect is for some a flaw, and for others part of the overall impression. From Brazil, coffees with various phenol intensities can be purchased: from the gentle, slightly unclean phenol cup to the strongly perceptible phenol defect that dominates the cup.

    • Origin: uncontrolled fermentation, poor storage
    • optically recognizable: no
    • roasts differently: no
    • negative sensory impact: minor to very strong

    Quaker

    immature Coffee

    An immature bean that appears as a quaker, a light bean, when roasted

    Quakers are often lighter beans with low density or those that have high density but didn't receive all the nutrients. Quakers already appear faded in green coffee, then yellowish to light brown in roasted coffee. At their root is a nutrient deficiency. In washing channels they can already be separated on the farm, since these floaters float to the top.

    Later, shortly before export, the green coffee is hulled and classified at the dry mill. On vibrating tables, the coffee is sorted once more by density. Floaters, or quakers as they're called then, can be separated from denser beans here. And yet a few quakers always make it into the final product.

    Optically the quakers are easy to recognize because they are noticeably lighter than intact roasted coffee beans. Sensorically, the influence on cup quality can vary: They can dilute the coffee flavor, changing it to an undefined nuttiness – often peanutty. Additionally, a high number of quakers can produce a dry mouthfeel.

    • Origin: nutrient deficiency
    • optically recognizable: yes
    • roasts differently: yes
    • negative sensory impact: minimal to moderate

    Insect Damage / Broca

    Broca Coffee Kaffee

    Broca – from two entry holes to complete infestation

    The coffee berry borer (Broca beetle) infests the cherries while they are still on the tree. It bores into the cherry, with the entry point usually at the end opposite the stem. With its ovipositor, the insect lays up to three eggs per day over 20 days. After a rest period, the process starts again. Up to 120 eggs are laid this way by a single female coffee borer.

    Infested beans are tunneled through, become susceptible to uncontrolled fermentation, spore infestation, and lose density. These beans are sorted out before export. The holes are visually recognizable in the bean and evidence of infestation. Tastewise, a few holes have little impact as long as the bean has not been infested by other microorganisms. From four holes per bean, it is considered heavy infestation and, according to the earlier Q-Grade standard, a severe defect that could be tasted.

    • Origin: coffee berry borer beetle
    • visually recognizable: yes
    • roasts differently: little
    • negative sensory impact: from little to strong

    Shells, Ears, crushed beans

    Shells Ears Coffee

    The shells, ears, crushed or split beans originate from pulping the coffee cherry. If the machine calibration is poorly set, the discs can crush or push apart the still very moist bean. These "split" beans are sorted out before export, but also repeatedly make it into the final product.

    Since these beans are no longer intact and have significantly lower density, they roast quite differently. They burn faster and become charred and ashy.

    • Origin: pulping of coffee cherries
    • visually recognizable: yes
    • roasts differently: yes
    • negative sensory impact: medium to strong

    Little uniformity

    Coffee beans don't all look the same – because they are coffee beans. What helps during roasting is the most uniform screen sizes possible, meaning bean sizes.

    When very small and very large beans are roasted together, heat transfer occurs very differently: in the small bean, heat penetrates the core faster, while the large bean is hardly heated inside yet.

    As uniform bean sizes as possible produce a uniform flavor profile because they behave more evenly in the roaster.

    Broken beans

    Already dried green coffee beans can break during transport – usually into smaller pieces because they are already dry and don't contain moisture like shells do. The broken splinters roast quickly and become charred and ashy.

    Defects that occur during roasting

    Officially, the following "defects" are considered flaws; some may categorize them as style. In any case, they can have minimal to strong impact on flavor. Whether this contributes positively to the character of the coffee or not remains an individual decision.

    Oily beans

    ölige Bohnen

    Very high end temperatures cause coffee to become increasingly dark. The cells burst and the coffee bean becomes more porous. The oil contained in the bean encounters less resistance during degassing and is forced outward, so an oily layer deposits on the surface.

    The problem with oil is that it eventually becomes rancid – the same applies to coffee oil. We avoid heavily oiled coffees because they also unnecessarily dirty grinders and automatic machines.

    Tipping and scorching

    Two further consequences when roasting at very high temperatures – but this time in different ways:

    Tipping:

    Particularly in industrial hot air roasters, where beans practically shoot through the hot air stream, a pointed burn often results, the so-called tipping. At the place where the bean is weakest – at both ends, because the heated water is pushed there and escapes. This is clearly visible as a small black dot: the embryo. Fast, hot roasts can result in tipping. In very light roasts, tipping can be detected sensorially – perhaps less because of the burnt embryo, but because of the very rapid temperature rise that prevents the development of other aromas.


    Scorching:

    Scorching Coffee

    Scorching occurs when a bean lies too long against the very hot drum wall. This can happen at slow drum speeds or with full batches. Intensive scorching results in a roasty, ashy sheen in the coffee cup.

    Contextualization: are we all too picky?

    Coffee is a natural product and therefore optical differences in beans are a fact. There are coffees that are not uniform in appearance but convince in flavor. There are equally coffees that are uniform but fall short in quality. The optical assessment of defects helps mainly to gain an understanding of how the coffee was made:

    • Where could improvements be made?
    • What pest is currently spreading on the farm?
    • And are the pulper and vibrating table precisely calibrated?

    A defect that will show even more strongly in the future due to changing weather patterns is the quaker bean: the light bean that often smells of peanuts. If this is not sorted out in the green coffee, it can be separated after roasting, where it becomes optically much more visible. In recent years, roasteries have upgraded for this and installed so-called color sorters – sorting machines that selectively sort out beans by color or shape using air jets.

    These color sorters are helpful, reduce inequalities, but also reduce volume. If I set the machine to remove three percent of all beans, and I roast, for example, 100 tons of coffee annually, that would be three tons of waste per year.

    At a green coffee price of 10 CHF per kilo, that would be 30,000 CHF spent on coffee that is then not used. It is thus also an economic factor whether and how heavily beans are sorted out.

    And then I see a tendency where sometimes too much scrutiny is applied: There are roasteries that sort out every tiny color variation. That's interesting in a boutique market, and anyone who wants to pay more for flawless beans can do so. However, this shouldn't lead to inflated expectations. Just because a bean doesn't look "perfect" doesn't mean it's bad. It reminds me of the time when I cupped coffees with seasoned Q-Graders who then picked apart a 79-point coffee because it wasn't top tier.

    But there's a big world between rejected goods and boutique coffees. Sometimes it helps to use common sense – or even more importantly: to trust your palate.

    Reality Check on the Coffee Farm

    Finally, there's the reality on the coffee farm. In the Adventure Filter Subscription, we present special, rare coffees each month – again and again, the tiniest lots from individual producers. These coffees are typically never "perfectly" sorted because there simply isn't more coffee. If a producer makes 500 kg of coffee, she's hardly going to divide it into five different sizes and then sell five separate mini-lots of 100 kg each. There simply isn't a market for that. So she mixes all her coffee and perhaps removes the smallest and largest five percent, which already provides somewhat more uniformity.

    And then it really comes down to how a roastery handles these beans. I love roasting super-sorted beans. But when they're not available, we adjust the roasting profile a bit, roast a little longer – and achieve the desired results.

    So it's worth taking a closer look at all defects in coffee.

    What do you think?